Re: [PATCH V13 2/5] PCI: Create device tree node for bridge

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 11 Sep 2023 09:58:04 -0700
Lizhi Hou <lizhi.hou@xxxxxxx> wrote:

> On 9/11/23 07:48, Jonathan Cameron wrote:
> > On Tue, 15 Aug 2023 10:19:57 -0700
> > Lizhi Hou <lizhi.hou@xxxxxxx> wrote:
> >  
> >> The PCI endpoint device such as Xilinx Alveo PCI card maps the register
> >> spaces from multiple hardware peripherals to its PCI BAR. Normally,
> >> the PCI core discovers devices and BARs using the PCI enumeration process.
> >> There is no infrastructure to discover the hardware peripherals that are
> >> present in a PCI device, and which can be accessed through the PCI BARs.
> >>
> >> Apparently, the device tree framework requires a device tree node for the
> >> PCI device. Thus, it can generate the device tree nodes for hardware
> >> peripherals underneath. Because PCI is self discoverable bus, there might
> >> not be a device tree node created for PCI devices. Furthermore, if the PCI
> >> device is hot pluggable, when it is plugged in, the device tree nodes for
> >> its parent bridges are required. Add support to generate device tree node
> >> for PCI bridges.
> >>
> >> Add an of_pci_make_dev_node() interface that can be used to create device
> >> tree node for PCI devices.
> >>
> >> Add a PCI_DYNAMIC_OF_NODES config option. When the option is turned on,
> >> the kernel will generate device tree nodes for PCI bridges unconditionally.
> >>
> >> Initially, add the basic properties for the dynamically generated device
> >> tree nodes which include #address-cells, #size-cells, device_type,
> >> compatible, ranges, reg.
> >>
> >> Acked-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
> >> Signed-off-by: Lizhi Hou <lizhi.hou@xxxxxxx>  
> > I tried to bring this up for a custom PCIe card emulated in QEMU on an ARM ACPI
> > machine.
> >
> > There are some missing parts that were present in Clements series, but not this
> > one, particularly creation of the root pci object.  
> Thanks for trying this. The entire effort was separated in different 
> phases. That is why this patchset does not include creating of_root.
> >
> > Anyhow, hit an intermittent crash...
> >
> >  
> >> ---
> >> +static int of_pci_prop_intr_map(struct pci_dev *pdev, struct of_changeset *ocs,
> >> +				struct device_node *np)
> >> +{
> >> +	struct of_phandle_args out_irq[OF_PCI_MAX_INT_PIN];
> >> +	u32 i, addr_sz[OF_PCI_MAX_INT_PIN], map_sz = 0;
> >> +	__be32 laddr[OF_PCI_ADDRESS_CELLS] = { 0 };
> >> +	u32 int_map_mask[] = { 0xffff00, 0, 0, 7 };
> >> +	struct device_node *pnode;
> >> +	struct pci_dev *child;
> >> +	u32 *int_map, *mapp;
> >> +	int ret;
> >> +	u8 pin;
> >> +
> >> +	pnode = pci_device_to_OF_node(pdev->bus->self);
> >> +	if (!pnode)
> >> +		pnode = pci_bus_to_OF_node(pdev->bus);
> >> +
> >> +	if (!pnode) {
> >> +		pci_err(pdev, "failed to get parent device node");
> >> +		return -EINVAL;
> >> +	}
> >> +
> >> +	laddr[0] = cpu_to_be32((pdev->bus->number << 16) | (pdev->devfn << 8));
> >> +	for (pin = 1; pin <= OF_PCI_MAX_INT_PIN;  pin++) {
> >> +		i = pin - 1;
> >> +		out_irq[i].np = pnode;
> >> +		out_irq[i].args_count = 1;
> >> +		out_irq[i].args[0] = pin;
> >> +		ret = of_irq_parse_raw(laddr, &out_irq[i]);
> >> +		if (ret) {
> >> +			pci_err(pdev, "parse irq %d failed, ret %d", pin, ret);
> >> +			continue;  
> > If all the interrupt parsing fails we continue ever time...  
> 
> Did you use Clement's patch to create of_root? I am just wondering if 
> parsing irq could fail on a dt-based system.

For qemu already have of_root as there is still a device tree, it's just
used to pass some stuff to EDK2 I think. I was carrying the Frank's
series adding a bare device tree, it's just not doing anything on these
systems

I used Clements patch to add the pci root (cleaned up a bit to
match the style of your series more closely).

However, my interest is in ACPI based systems, not DT based ones.

Jonathan


> 
> And yes, the failure case should be handled without crash. I think if 
> irq parsing failed,  the interrupt-map pair generation should be skipped.
> 
> 
> Thanks,
> 
> Lizhi
> 
> >  
> >> +		}
> >> +		ret = of_property_read_u32(out_irq[i].np, "#address-cells",
> >> +					   &addr_sz[i]);
> >> +		if (ret)
> >> +			addr_sz[i] = 0;  
> > This never happens.
> >  
> >> +	}
> >> +
> >> +	list_for_each_entry(child, &pdev->subordinate->devices, bus_list) {
> >> +		for (pin = 1; pin <= OF_PCI_MAX_INT_PIN; pin++) {
> >> +			i = pci_swizzle_interrupt_pin(child, pin) - 1;
> >> +			map_sz += 5 + addr_sz[i] + out_irq[i].args_count;  
> > and here we end up derefencing random memory which happens in my case to cause
> > a massive allocation sometimes and that fails one of the assertions in the
> > allocator.
> >
> > I'd suggest just setting addr_sz[xxx] = {}; above
> > to ensure it's initialized. Then the if(ret) handling should not be needed
> > as well as of_property_read_u32 should be side effect free I hope!
> >  
> >> +		}
> >> +	}
> >> +
> >> +	int_map = kcalloc(map_sz, sizeof(u32), GFP_KERNEL);
> >> +	mapp = int_map;  




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux