Hello Rob, On 09/09/23 03:47, Rob Herring wrote: > On Wed, Jul 26, 2023 at 1:54 AM Siddharth Vadapalli <s-vadapalli@xxxxxx> wrote: >> >> From: Kishon Vijay Abraham I <kishon@xxxxxx> >> >> The MAIN CPSW2G instance of CPSW on J721S2 SoC can be enabled with the GESI >> Expansion Board connected to the J7 Common-Proc-Board. Use the overlay >> to enable this. >> >> Add alias for the MAIN CPSW2G port to enable kernel to fetch MAC address >> directly from U-Boot. >> >> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx> >> Signed-off-by: Siddharth Vadapalli <s-vadapalli@xxxxxx> >> Reviewed-by: Ravi Gunasekaran <r-gunasekaran@xxxxxx> >> --- >> arch/arm64/boot/dts/ti/Makefile | 2 + >> .../dts/ti/k3-j721s2-evm-gesi-exp-board.dtso | 85 +++++++++++++++++++ >> 2 files changed, 87 insertions(+) >> create mode 100644 arch/arm64/boot/dts/ti/k3-j721s2-evm-gesi-exp-board.dtso >> >> diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile >> index 6dd7b6f1d6ab..019a8be19b93 100644 >> --- a/arch/arm64/boot/dts/ti/Makefile >> +++ b/arch/arm64/boot/dts/ti/Makefile >> @@ -51,6 +51,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk.dtb >> # Boards with J721s2 SoC >> dtb-$(CONFIG_ARCH_K3) += k3-am68-sk-base-board.dtb >> dtb-$(CONFIG_ARCH_K3) += k3-j721s2-common-proc-board.dtb >> +dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-gesi-exp-board.dtbo > > Overlays need to be applied to something. That's done like this: > > foo-dtbs := base.dtb k3-am62x-sk-hdmi-audio.dtbo > dtb-y += foo.dtb > > Please send a fix for this. I have posted the fix at: https://lore.kernel.org/r/20230911052158.89185-1-s-vadapalli@xxxxxx/ > > Rob -- Regards, Siddharth.
