[PATCH 1/4] ARM: dts: ti: omap: Fix bandgap thermal cells addressing for omap3/4

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Fix "thermal_sys: cpu_thermal: Failed to read thermal-sensors cells: -2"
error on boot for omap3/4. This is caused by wrong addressing in the dts
for bandgap sensor for single sensor instances.

Note that omap4-cpu-thermal.dtsi is shared across omap4/5 and dra7, so
we can't just change the addressing in omap4-cpu-thermal.dtsi.

Cc: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx>
Cc: Carl Philipp Klemm <philipp@xxxxxxxx>
Cc: Merlijn Wajer <merlijn@xxxxxxxxxx>
Cc: Pavel Machek <pavel@xxxxxx>
Cc: Sebastian Reichel <sre@xxxxxxxxxx>
Fixes: a761d517bbb1 ("ARM: dts: omap3: Add cpu_thermal zone")
Fixes: 0bbf6c54d100 ("arm: dts: add omap4 CPU thermal data")
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
 arch/arm/boot/dts/ti/omap/omap3-cpu-thermal.dtsi | 3 +--
 arch/arm/boot/dts/ti/omap/omap4-cpu-thermal.dtsi | 5 ++++-
 arch/arm/boot/dts/ti/omap/omap443x.dtsi          | 1 +
 arch/arm/boot/dts/ti/omap/omap4460.dtsi          | 1 +
 4 files changed, 7 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/ti/omap/omap3-cpu-thermal.dtsi b/arch/arm/boot/dts/ti/omap/omap3-cpu-thermal.dtsi
--- a/arch/arm/boot/dts/ti/omap/omap3-cpu-thermal.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-cpu-thermal.dtsi
@@ -12,8 +12,7 @@ cpu_thermal: cpu-thermal {
 	polling-delay = <1000>; /* milliseconds */
 	coefficients = <0 20000>;
 
-			/* sensor       ID */
-	thermal-sensors = <&bandgap     0>;
+	thermal-sensors = <&bandgap>;
 
 	cpu_trips: trips {
 		cpu_alert0: cpu_alert {
diff --git a/arch/arm/boot/dts/ti/omap/omap4-cpu-thermal.dtsi b/arch/arm/boot/dts/ti/omap/omap4-cpu-thermal.dtsi
--- a/arch/arm/boot/dts/ti/omap/omap4-cpu-thermal.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap4-cpu-thermal.dtsi
@@ -12,7 +12,10 @@ cpu_thermal: cpu_thermal {
 	polling-delay-passive = <250>; /* milliseconds */
 	polling-delay = <1000>; /* milliseconds */
 
-			/* sensor       ID */
+	/*
+	 * See 44xx files for single sensor addressing, omap5 and dra7 need
+	 * also sensor ID for addressing.
+	 */
 	thermal-sensors = <&bandgap     0>;
 
 	cpu_trips: trips {
diff --git a/arch/arm/boot/dts/ti/omap/omap443x.dtsi b/arch/arm/boot/dts/ti/omap/omap443x.dtsi
--- a/arch/arm/boot/dts/ti/omap/omap443x.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap443x.dtsi
@@ -69,6 +69,7 @@ abb_iva: regulator-abb-iva {
 };
 
 &cpu_thermal {
+	thermal-sensors = <&bandgap>;
 	coefficients = <0 20000>;
 };
 
diff --git a/arch/arm/boot/dts/ti/omap/omap4460.dtsi b/arch/arm/boot/dts/ti/omap/omap4460.dtsi
--- a/arch/arm/boot/dts/ti/omap/omap4460.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap4460.dtsi
@@ -79,6 +79,7 @@ abb_iva: regulator-abb-iva {
 };
 
 &cpu_thermal {
+	thermal-sensors = <&bandgap>;
 	coefficients = <348 (-9301)>;
 };
 
-- 
2.42.0



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux