Re: [PATCH 6/6] arm64: dts: qcom: add uart console support for SM4450

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 08/09/2023 08:58, Tengfei Fan wrote:
> Add base description of UART, TLMM, interconnect, TCSRCC and SMMU nodes
> which helps SM4450 boot to shell with console on boards with this SoC.
> 
> Signed-off-by: Tengfei Fan <quic_tengfan@xxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sm4450-qrd.dts |  14 +-
>  arch/arm64/boot/dts/qcom/sm4450.dtsi    | 258 ++++++++++++++++++++++++
>  2 files changed, 270 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sm4450-qrd.dts b/arch/arm64/boot/dts/qcom/sm4450-qrd.dts
> index 00a1c81ca397..bb8c58fb4267 100644
> --- a/arch/arm64/boot/dts/qcom/sm4450-qrd.dts
> +++ b/arch/arm64/boot/dts/qcom/sm4450-qrd.dts
> @@ -10,9 +10,19 @@
>  	model = "Qualcomm Technologies, Inc. SM4450 QRD";
>  	compatible = "qcom,sm4450-qrd", "qcom,sm4450";
>  
> -	aliases { };
> +	aliases {
> +		serial0 = &uart7;
> +	};
>  
>  	chosen {
> -		bootargs = "console=hvc0";
> +		stdout-path = "serial0:115200n8";

Wait, what? You told me you cannot use serial and stdout-path!

https://lore.kernel.org/all/f0f94ea9-94b1-ccd1-0a43-3cb119fc5d94@xxxxxxxxxxx/

>  	};
>  };
> +
> +&qupv3_id_0 {
> +	status = "okay";
> +};
> +
> +&uart7 {
> +	status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/qcom/sm4450.dtsi b/arch/arm64/boot/dts/qcom/sm4450.dtsi
> index 2395b1d655a2..3af7255fca35 100644
> --- a/arch/arm64/boot/dts/qcom/sm4450.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm4450.dtsi
> @@ -7,6 +7,8 @@
>  #include <dt-bindings/clock/qcom,sm4450-gcc.h>
>  #include <dt-bindings/gpio/gpio.h>
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/interconnect/qcom,icc.h>
> +#include <dt-bindings/interconnect/qcom,sm4450.h>
>  #include <dt-bindings/soc/qcom,rpmh-rsc.h>
>  
>  / {
> @@ -262,6 +264,26 @@
>  		};
>  	};
>  
> +	firmware {
> +		scm: scm {
> +			compatible = "qcom,scm-sm4450", "qcom,scm";
> +			interconnects = <&aggre2_noc MASTER_CRYPTO 0 &mc_virt SLAVE_EBI1 0>;
> +			#reset-cells = <1>;
> +		};
> +	};
> +
> +	clk_virt: interconnect-0 {
> +		compatible = "qcom,sm4450-clk-virt";
> +		#interconnect-cells = <2>;
> +		qcom,bcm-voters = <&apps_bcm_voter>;
> +	};
> +
> +	mc_virt: interconnect-1 {
> +		compatible = "qcom,sm4450-mc-virt";
> +		#interconnect-cells = <2>;
> +		qcom,bcm-voters = <&apps_bcm_voter>;
> +	};
> +
>  	memory@a0000000 {
>  		device_type = "memory";
>  		/* We expect the bootloader to fill in the size */
> @@ -387,12 +409,118 @@
>  			clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
>  		};
>  
> +		qupv3_id_0: geniqup@ac0000 {
> +			compatible = "qcom,geni-se-qup";
> +			reg = <0x0 0x00ac0000 0x0 0x2000>;
> +			ranges;
> +			clock-names = "m-ahb", "s-ahb";
> +			clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
> +				 <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
> +			iommus = <&apps_smmu 0x163 0x0>;
> +			interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>;
> +			interconnect-names = "qup-core";
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			status = "disabled";
> +
> +			uart7: serial@a88000 {
> +				compatible = "qcom,geni-debug-uart";
> +				reg = <0 0x00a88000 0 0x4000>;
> +				clock-names = "se";
> +				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
> +				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
> +				pinctrl-names = "default";
> +				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
> +				status = "disabled";
> +			};
> +		};
> +
> +		aggre1_noc: interconnect@16e0000 {
> +			tible = "qcom,sm4450-aggre1-noc";
> +			reg = <0 0x016e0000 0 0x1c080>;
> +			#interconnect-cells = <2>;
> +			clocks = <&gcc GCC_SDCC2_AHB_CLK>;
> +			qcom,bcm-voters = <&apps_bcm_voter>;
> +		};
> +
> +		aggre2_noc: interconnect@1700000 {
> +			compatible = "qcom,sm4450-aggre2-noc";
> +			reg = <0 0x01700000 0 0x31080>;
> +			#interconnect-cells = <2>;
> +			qcom,bcm-voters = <&apps_bcm_voter>;
> +			clocks = <&rpmhcc RPMH_IPA_CLK>,
> +				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>;
> +		};
> +
> +		cnoc2: interconnect@1500000 {

Keep order by unit address.

> +			compatible = "qcom,sm4450-cnoc2";
> +			reg = <0 0x1500000 0 0x6200>;
> +			#interconnect-cells = <2>;
> +			qcom,bcm-voters = <&apps_bcm_voter>;
> +		};
> +

...

> +
>  		intc: interrupt-controller@17200000 {
>  			compatible = "arm,gic-v3";
>  			reg = <0x0 0x17200000 0x0 0x10000>,     /* GICD */
> @@ -480,4 +711,31 @@
>  			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
>  			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
>  	};
> +
> +	tlmm: pinctrl@f100000 {

You did not test it... This node cannot be here and tools will tell you
this. No need for review from us - tools are doing this.

It does not look like you tested the DTS against bindings. Please run
`make dtbs_check W=1` (see
Documentation/devicetree/bindings/writing-schema.rst or
https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/
for instructions).
> +		compatible = "qcom,sm4450-tlmm";
> +		reg = <0 0x0f100000 0 0x300000>;
> +		interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +		gpio-ranges = <&tlmm 0 0 137>;
> +		wakeup-parent = <&pdc>;
> +
> +		qup_uart7_rx: qup-uart7-rx-state {
> +			pins = "gpio22";
> +			function = "qup1_se2_l2";
> +			drive-strength = <2>;
> +			bias-disable;
> +		};
> +
> +		qup_uart7_tx: qup-uart7-tx-state {
> +			pins = "gpio22";
> +			function = "qup1_se2_l2";
> +			drive-strength = <2>;
> +			bias-disable;
> +		};
> +	};
> +

Stray blank line.

>  };

Best regards,
Krzysztof




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux