There are devices in the wild, like the Sony Xperia 1 V that *require*
different tuning than the base design for USB to work.
Add support for overriding the necessary tuning values.
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c b/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c
index 645f0e95703a..53e10feb16a1 100644
--- a/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c
+++ b/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c
@@ -141,7 +141,9 @@ static int eusb2_repeater_init_vregs(struct eusb2_repeater *rptr)
static int eusb2_repeater_init(struct phy *phy)
{
struct eusb2_repeater *rptr = phy_get_drvdata(phy);
- const u32 *init_tbl = rptr->cfg->init_tbl;
+ struct device_node *np = rptr->dev->of_node;
+ u32 init_tbl[F_NUM_TUNE_FIELDS] = { 0 };
+ u8 override;
u32 val;
int ret;
int i;
@@ -152,6 +154,17 @@ static int eusb2_repeater_init(struct phy *phy)
regmap_field_update_bits(rptr->regs[F_EN_CTL1], EUSB2_RPTR_EN, EUSB2_RPTR_EN);
+ memcpy(init_tbl, rptr->cfg->init_tbl, sizeof(init_tbl));
+
+ if (!of_property_read_u8(np, "qcom,tune-iusb2-value", &override))
+ init_tbl[F_TUNE_IUSB2] = override;
+
+ if (!of_property_read_u8(np, "qcom,tune-hsdisc-value", &override))
+ init_tbl[F_TUNE_HSDISC] = override;
+
+ if (!of_property_read_u8(np, "qcom,tune-usb2-preem-value", &override))
+ init_tbl[F_TUNE_USB2_PREEM] = override;
+
for (i = 0; i < F_NUM_TUNE_FIELDS; i++)
regmap_field_update_bits(rptr->regs[i], init_tbl[i], init_tbl[i]);
--
2.42.0
