On 29/08/2023 11:54, Gokul Sriram Palanisamy wrote:
> Add the APCS, A53 PLL, cpu-opp-table nodes to set
> the CPU frequency at optimal range.
>
> Co-developed-by: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
> Signed-off-by: Sricharan Ramabadhran <quic_srichara@xxxxxxxxxxx>
> Signed-off-by: Gokul Sriram Palanisamy <quic_gokulsri@xxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/ipq5018.dtsi | 34 +++++++++++++++++++++++++++
> 1 file changed, 34 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> index 9f13d2dcdfd5..05843517312c 100644
> --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
> @@ -8,6 +8,7 @@
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> #include <dt-bindings/clock/qcom,gcc-ipq5018.h>
> #include <dt-bindings/reset/qcom,gcc-ipq5018.h>
> +#include <dt-bindings/clock/qcom,apss-ipq.h>
c is before r.
>
> / {
> interrupt-parent = <&intc>;
> @@ -36,6 +37,8 @@ CPU0: cpu@0 {
> reg = <0x0>;
> enable-method = "psci";
> next-level-cache = <&L2_0>;
> + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
> + operating-points-v2 = <&cpu_opp_table>;
> };
>
> CPU1: cpu@1 {
> @@ -44,6 +47,8 @@ CPU1: cpu@1 {
> reg = <0x1>;
> enable-method = "psci";
> next-level-cache = <&L2_0>;
> + clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
> + operating-points-v2 = <&cpu_opp_table>;
> };
>
> L2_0: l2-cache {
> @@ -54,6 +59,17 @@ L2_0: l2-cache {
> };
> };
>
> + cpu_opp_table: opp-table-cpu {
> + compatible = "operating-points-v2";
> + opp-shared;
> +
> + opp-1008000000 {
> + opp-hz = /bits/ 64 <1008000000>;
> + opp-microvolt = <1100000>;
> + clock-latency-ns = <200000>;
And the rest of OPPs?
> + };
> + };
> +
> firmware {
> scm {
> compatible = "qcom,scm-ipq5018", "qcom,scm";
> @@ -181,6 +197,24 @@ v2m1: v2m@1000 {
> };
> };
>
> + a53pll: clock@b116000 {
> + compatible = "qcom,ipq5018-a53pll";
> + reg = <0x0b116000 0x40>;
> + #clock-cells = <0>;
> + clocks = <&xo_board_clk>;
> + clock-names = "xo";
> + };
> +
> + apcs_glb: mailbox@b111000 {
0xb111000 looks lower than 0x116000.
> + compatible = "qcom,ipq5018-apcs-apps-global",
> + "qcom,ipq6018-apcs-apps-global";
> + reg = <0x0b111000 0x1000>;
Best regards,
Krzysztof
