This series adds support for the APSS clock to bump the CPU frequency above 800MHz. APSS PLL found in the IPQ5018 is of type Stromer. - The first patch in the series adds the required a53pll compatible. - The second patch adds Stormer PLL offsets, its configuration values and regmap and modify probe to reuse clk_stromer_pll_configure() for Stormer which was added for Stormer Plus. - The third patch adds dts nodes to enable the pll along with the cpu operating frequency table. Gokul Sriram Palanisamy (3): dt-bindings: clock: qcom,a53pll: add IPQ5018 compatible clk: qcom: apss-ipq-pll: add support for IPQ5018 arm64: dts: qcom: ipq5018: enable the CPUFreq support .../bindings/clock/qcom,a53pll.yaml | 1 + arch/arm64/boot/dts/qcom/ipq5018.dtsi | 34 ++++++++++++ drivers/clk/qcom/apss-ipq-pll.c | 52 ++++++++++++++++++- 3 files changed, 86 insertions(+), 1 deletion(-) -- 2.34.1