According to the documentation the ls1043a has only one spi controller. So remove the second one. Signed-off-by: Gregor Herburger <gregor.herburger@xxxxxxxxxxxxxxx> --- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 14 -------------- 1 file changed, 14 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index f8acbefc805b..229bb4bebe42 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -526,20 +526,6 @@ dspi0: spi@2100000 { status = "disabled"; }; - dspi1: spi@2110000 { - compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0x2110000 0x0 0x10000>; - interrupts = <0 65 0x4>; - clock-names = "dspi"; - clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL - QORIQ_CLK_PLL_DIV(1)>; - spi-num-chipselects = <5>; - big-endian; - status = "disabled"; - }; - i2c0: i2c@2180000 { compatible = "fsl,ls1043a-i2c", "fsl,vf610-i2c"; #address-cells = <1>; -- 2.34.1