On Sun, Aug 27, 2023 at 5:04 AM Serge Semin <fancer.lancer@xxxxxxxxx> wrote: > > On Thu, Aug 24, 2023 at 08:50:10PM +0800, Keguang Zhang wrote: > > Add devicetree binding document for Loongson-1 Ethernet controller. > > > > Signed-off-by: Keguang Zhang <keguang.zhang@xxxxxxxxx> > > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> > > --- > > V2 -> V3: Split the DT-schema file into loongson,ls1b-gmac.yaml > > and loongson,ls1c-emac.yaml (suggested by Serge Semin) > > Change the compatibles to loongson,ls1b-gmac and loongson,ls1c-emac > > Rename loongson,dwmac-syscon to loongson,ls1-syscon > > Amend the title > > Add description > > Add Reviewed-by tag from Krzysztof Kozlowski(Sorry! I'm not sure) > > V1 -> V2: Fix "clock-names" and "interrupt-names" property > > Rename the syscon property to "loongson,dwmac-syscon" > > Drop "phy-handle" and "phy-mode" requirement > > Revert adding loongson,ls1b-dwmac/loongson,ls1c-dwmac > > to snps,dwmac.yaml > > > > .../bindings/net/loongson,ls1b-gmac.yaml | 115 ++++++++++++++++++ > > .../bindings/net/loongson,ls1c-emac.yaml | 114 +++++++++++++++++ > > 2 files changed, 229 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/net/loongson,ls1b-gmac.yaml > > create mode 100644 Documentation/devicetree/bindings/net/loongson,ls1c-emac.yaml > > > > diff --git a/Documentation/devicetree/bindings/net/loongson,ls1b-gmac.yaml b/Documentation/devicetree/bindings/net/loongson,ls1b-gmac.yaml > > new file mode 100644 > > index 000000000000..f661d5b86649 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/net/loongson,ls1b-gmac.yaml > > @@ -0,0 +1,115 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/net/loongson,ls1b-gmac.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Loongson-1B Gigabit Ethernet MAC Controller > > + > > +maintainers: > > + - Keguang Zhang <keguang.zhang@xxxxxxxxx> > > + > > > +description: > > Use "|" to keep the text formatting. > description: | > Will do. > > + Loongson-1B Gigabit Ethernet MAC Controller is based on > > + Synopsys DesignWare MAC (version 3.50a). > > + > > > + Main features > > + - Dual 10/100/1000Mbps GMAC controllers > > + - Full-duplex operation (IEEE 802.3x flow control automatic transmission) > > + - Half-duplex operation (CSMA/CD Protocol and back-pressure support) > > + - RX Checksum Offload > > + - TX Checksum insertion > > + - MII interface > > + - RGMII interface > > If only all the DW *MAC-based devices have such info in the > bindings the life would have been much easier... > > > + > > +select: > > + properties: > > + compatible: > > + contains: > > + enum: > > + - loongson,ls1b-gmac > > + required: > > + - compatible > > + > > +properties: > > + compatible: > > + items: > > + - enum: > > + - loongson,ls1b-gmac > > + - const: snps,dwmac-3.50a > > + > > + reg: > > + maxItems: 1 > > + > > + clocks: > > + maxItems: 1 > > + > > > + clock-names: > > + items: > > + - const: stmmaceth > > since there is a single clock then just: > clock-names: > const: stmmaceth > > > + > > + interrupts: > > + maxItems: 1 > > + > > > + interrupt-names: > > + items: > > + - const: macirq > > ditto. just > interrupt-names: > const: macirq > > > + > > + loongson,ls1-syscon: > > + $ref: /schemas/types.yaml#/definitions/phandle > > + description: > > + Phandle to the syscon containing some extra configurations > > + including PHY interface mode. > > + > > > + phy-mode: > > + items: > > + - enum: > > + - mii > > + - rgmii-id > > it's a single string then just: > phy-mode: > enum: ... > Will do. > > + > > +required: > > + - compatible > > + - reg > > + - clocks > > + - clock-names > > + - interrupts > > + - interrupt-names > > + - loongson,ls1-syscon > > + > > +allOf: > > + - $ref: snps,dwmac.yaml# > > + > > +unevaluatedProperties: false > > + > > +examples: > > + - | > > + #include <dt-bindings/clock/loongson,ls1x-clk.h> > > + #include <dt-bindings/interrupt-controller/irq.h> > > + > > + gmac0: ethernet@1fe10000 { > > + compatible = "loongson,ls1b-gmac", "snps,dwmac-3.50a"; > > + reg = <0x1fe10000 0x10000>; > > + > > + clocks = <&clkc LS1X_CLKID_AHB>; > > + clock-names = "stmmaceth"; > > + > > + interrupt-parent = <&intc1>; > > + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-names = "macirq"; > > + > > + loongson,ls1-syscon = <&syscon>; > > + > > + phy-handle = <&phy0>; > > + phy-mode = "mii"; > > + snps,pbl = <1>; > > + > > + mdio { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + compatible = "snps,dwmac-mdio"; > > + > > + phy0: ethernet-phy@0 { > > + reg = <0x0>; > > + }; > > + }; > > + }; > > diff --git a/Documentation/devicetree/bindings/net/loongson,ls1c-emac.yaml b/Documentation/devicetree/bindings/net/loongson,ls1c-emac.yaml > > new file mode 100644 > > index 000000000000..1ffad41941bf > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/net/loongson,ls1c-emac.yaml > > @@ -0,0 +1,114 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/net/loongson,ls1c-emac.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Loongson-1C Ethernet MAC Controller > > + > > +maintainers: > > + - Keguang Zhang <keguang.zhang@xxxxxxxxx> > > + > > > +description: > > the same comment about the "|" modifier. > Will do. > > + Loongson-1C Ethernet MAC Controller is based on > > + Synopsys DesignWare MAC (version 3.50a). > > + > > > + Main features > > + - 10/100Mbps > > + - Full-duplex operation (IEEE 802.3x flow control automatic transmission) > > + - Half-duplex operation (CSMA/CD Protocol and back-pressure support) > > + - IEEE 802.1Q VLAN tag detection for reception frames > > + - MII interface > > + - RMII interface > > Based on the plat_stmmacenet_data data defined for the LS1C MAC it > also support support Tx COE. Isn't it? What about Rx COE? > > > + > > +select: > > + properties: > > + compatible: > > + contains: > > + enum: > > + - loongson,ls1c-emac > > + required: > > + - compatible > > + > > +properties: > > + compatible: > > + items: > > + - enum: > > + - loongson,ls1c-emac > > + - const: snps,dwmac-3.50a > > + > > + reg: > > + maxItems: 1 > > + > > + clocks: > > + maxItems: 1 > > + > > > + clock-names: > > + items: > > + - const: stmmaceth > > clock-names: > const: stmmaceth > ? > > > + > > + interrupts: > > + maxItems: 1 > > + > > > + interrupt-names: > > + items: > > + - const: macirq > > interrupt-names: > const: macirq > ? > > > + > > + loongson,ls1-syscon: > > + $ref: /schemas/types.yaml#/definitions/phandle > > + description: > > + Phandle to the syscon containing some extra configurations > > + including PHY interface mode. > > + > > > + phy-mode: > > + items: > > + - enum: > > + - mii > > + - rmii > > phy-mode: > enum: ... > ? Will do. > > -Serge(y) > > > + > > +required: > > + - compatible > > + - reg > > + - clocks > > + - clock-names > > + - interrupts > > + - interrupt-names > > + - loongson,ls1-syscon > > + > > +allOf: > > + - $ref: snps,dwmac.yaml# > > + > > +unevaluatedProperties: false > > + > > +examples: > > + - | > > + #include <dt-bindings/clock/loongson,ls1x-clk.h> > > + #include <dt-bindings/interrupt-controller/irq.h> > > + > > + emac: ethernet@1fe10000 { > > + compatible = "loongson,ls1c-emac", "snps,dwmac-3.50a"; > > + reg = <0x1fe10000 0x10000>; > > + > > + clocks = <&clkc LS1X_CLKID_AHB>; > > + clock-names = "stmmaceth"; > > + > > + interrupt-parent = <&intc1>; > > + interrupts = <2 IRQ_TYPE_LEVEL_HIGH>; > > + interrupt-names = "macirq"; > > + > > + loongson,ls1-syscon = <&syscon>; > > + > > + phy-handle = <&phy0>; > > + phy-mode = "mii"; > > + snps,pbl = <1>; > > + > > + mdio { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + compatible = "snps,dwmac-mdio"; > > + > > + phy0: ethernet-phy@13 { > > + reg = <0x13>; > > + }; > > + }; > > + }; > > -- > > 2.39.2 > > > > -- Best regards, Keguang Zhang
