Re: [PATCH v3 2/4] dt-bindings: net: Add Loongson-1 Ethernet Controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Aug 24, 2023 at 08:50:10PM +0800, Keguang Zhang wrote:
> Add devicetree binding document for Loongson-1 Ethernet controller.
> 
> Signed-off-by: Keguang Zhang <keguang.zhang@xxxxxxxxx>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> ---
> V2 -> V3: Split the DT-schema file into loongson,ls1b-gmac.yaml
>           and loongson,ls1c-emac.yaml (suggested by Serge Semin)
>           Change the compatibles to loongson,ls1b-gmac and loongson,ls1c-emac
>           Rename loongson,dwmac-syscon to loongson,ls1-syscon
>           Amend the title
>           Add description
>           Add Reviewed-by tag from Krzysztof Kozlowski(Sorry! I'm not sure)
> V1 -> V2: Fix "clock-names" and "interrupt-names" property
>           Rename the syscon property to "loongson,dwmac-syscon"
>           Drop "phy-handle" and "phy-mode" requirement
>           Revert adding loongson,ls1b-dwmac/loongson,ls1c-dwmac
>           to snps,dwmac.yaml
> 
>  .../bindings/net/loongson,ls1b-gmac.yaml      | 115 ++++++++++++++++++
>  .../bindings/net/loongson,ls1c-emac.yaml      | 114 +++++++++++++++++
>  2 files changed, 229 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/loongson,ls1b-gmac.yaml
>  create mode 100644 Documentation/devicetree/bindings/net/loongson,ls1c-emac.yaml
> 
> diff --git a/Documentation/devicetree/bindings/net/loongson,ls1b-gmac.yaml b/Documentation/devicetree/bindings/net/loongson,ls1b-gmac.yaml
> new file mode 100644
> index 000000000000..f661d5b86649
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/loongson,ls1b-gmac.yaml
> @@ -0,0 +1,115 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/loongson,ls1b-gmac.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Loongson-1B Gigabit Ethernet MAC Controller
> +
> +maintainers:
> +  - Keguang Zhang <keguang.zhang@xxxxxxxxx>
> +

> +description:

Use "|" to keep the text formatting.
  description: |

> +  Loongson-1B Gigabit Ethernet MAC Controller is based on
> +  Synopsys DesignWare MAC (version 3.50a).
> +

> +  Main features
> +  - Dual 10/100/1000Mbps GMAC controllers
> +  - Full-duplex operation (IEEE 802.3x flow control automatic transmission)
> +  - Half-duplex operation (CSMA/CD Protocol and back-pressure support)
> +  - RX Checksum Offload
> +  - TX Checksum insertion
> +  - MII interface
> +  - RGMII interface

If only all the DW *MAC-based devices have such info in the
bindings the life would have been much easier...

> +
> +select:
> +  properties:
> +    compatible:
> +      contains:
> +        enum:
> +          - loongson,ls1b-gmac
> +  required:
> +    - compatible
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - loongson,ls1b-gmac
> +      - const: snps,dwmac-3.50a
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +

> +  clock-names:
> +    items:
> +      - const: stmmaceth

since there is a single clock then just:
  clock-names:
    const: stmmaceth

> +
> +  interrupts:
> +    maxItems: 1
> +

> +  interrupt-names:
> +    items:
> +      - const: macirq

ditto. just
  interrupt-names:
    const: macirq

> +
> +  loongson,ls1-syscon:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description:
> +      Phandle to the syscon containing some extra configurations
> +      including PHY interface mode.
> +

> +  phy-mode:
> +    items:
> +      - enum:
> +          - mii
> +          - rgmii-id

it's a single string then just:
  phy-mode:
    enum: ...

> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - interrupts
> +  - interrupt-names
> +  - loongson,ls1-syscon
> +
> +allOf:
> +  - $ref: snps,dwmac.yaml#
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/loongson,ls1x-clk.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    gmac0: ethernet@1fe10000 {
> +        compatible = "loongson,ls1b-gmac", "snps,dwmac-3.50a";
> +        reg = <0x1fe10000 0x10000>;
> +
> +        clocks = <&clkc LS1X_CLKID_AHB>;
> +        clock-names = "stmmaceth";
> +
> +        interrupt-parent = <&intc1>;
> +        interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
> +        interrupt-names = "macirq";
> +
> +        loongson,ls1-syscon = <&syscon>;
> +
> +        phy-handle = <&phy0>;
> +        phy-mode = "mii";
> +        snps,pbl = <1>;
> +
> +        mdio {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +            compatible = "snps,dwmac-mdio";
> +
> +            phy0: ethernet-phy@0 {
> +                reg = <0x0>;
> +            };
> +        };
> +    };
> diff --git a/Documentation/devicetree/bindings/net/loongson,ls1c-emac.yaml b/Documentation/devicetree/bindings/net/loongson,ls1c-emac.yaml
> new file mode 100644
> index 000000000000..1ffad41941bf
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/loongson,ls1c-emac.yaml
> @@ -0,0 +1,114 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/loongson,ls1c-emac.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Loongson-1C Ethernet MAC Controller
> +
> +maintainers:
> +  - Keguang Zhang <keguang.zhang@xxxxxxxxx>
> +

> +description:

the same comment about the "|" modifier.

> +  Loongson-1C Ethernet MAC Controller is based on
> +  Synopsys DesignWare MAC (version 3.50a).
> +

> +  Main features
> +  - 10/100Mbps
> +  - Full-duplex operation (IEEE 802.3x flow control automatic transmission)
> +  - Half-duplex operation (CSMA/CD Protocol and back-pressure support)
> +  - IEEE 802.1Q VLAN tag detection for reception frames
> +  - MII interface
> +  - RMII interface

Based on the plat_stmmacenet_data data defined for the LS1C MAC it
also support support Tx COE. Isn't it? What about Rx COE?

> +
> +select:
> +  properties:
> +    compatible:
> +      contains:
> +        enum:
> +          - loongson,ls1c-emac
> +  required:
> +    - compatible
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +          - loongson,ls1c-emac
> +      - const: snps,dwmac-3.50a
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +

> +  clock-names:
> +    items:
> +      - const: stmmaceth

  clock-names:
    const: stmmaceth
?

> +
> +  interrupts:
> +    maxItems: 1
> +

> +  interrupt-names:
> +    items:
> +      - const: macirq

  interrupt-names:
    const: macirq
?

> +
> +  loongson,ls1-syscon:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description:
> +      Phandle to the syscon containing some extra configurations
> +      including PHY interface mode.
> +

> +  phy-mode:
> +    items:
> +      - enum:
> +          - mii
> +          - rmii

  phy-mode:
    enum: ...
?

-Serge(y)

> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - interrupts
> +  - interrupt-names
> +  - loongson,ls1-syscon
> +
> +allOf:
> +  - $ref: snps,dwmac.yaml#
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/loongson,ls1x-clk.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    emac: ethernet@1fe10000 {
> +        compatible = "loongson,ls1c-emac", "snps,dwmac-3.50a";
> +        reg = <0x1fe10000 0x10000>;
> +
> +        clocks = <&clkc LS1X_CLKID_AHB>;
> +        clock-names = "stmmaceth";
> +
> +        interrupt-parent = <&intc1>;
> +        interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
> +        interrupt-names = "macirq";
> +
> +        loongson,ls1-syscon = <&syscon>;
> +
> +        phy-handle = <&phy0>;
> +        phy-mode = "mii";
> +        snps,pbl = <1>;
> +
> +        mdio {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +            compatible = "snps,dwmac-mdio";
> +
> +            phy0: ethernet-phy@13 {
> +                reg = <0x13>;
> +            };
> +        };
> +    };
> -- 
> 2.39.2
> 
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux