The interrupt of SSBI PMICs is routed to the SoCs GPIO. As such, it is
not a property of the SoC, it is a property of the particular board
(even if it is standard and unified between all devices). Move these
interrupt specifications to the board files.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts | 4 ++++
arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts | 4 ++++
arch/arm/boot/dts/qcom/qcom-msm8960.dtsi | 2 --
3 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts
index 4641b4f2195d..43149c90c4fc 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts
@@ -88,6 +88,10 @@ clk-pins {
};
};
+&pm8921 {
+ interrupts-extended = <&msmgpio 104 IRQ_TYPE_LEVEL_LOW>;
+};
+
&pm8921_keypad {
linux,keymap = <
MATRIX_KEY(0, 0, KEY_VOLUMEUP)
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
index 13e85c287498..9e203164beb6 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
@@ -84,6 +84,10 @@ clk-pins {
};
};
+&pm8921 {
+ interrupts-extended = <&msmgpio 104 IRQ_TYPE_LEVEL_LOW>;
+};
+
&rpm {
regulators {
compatible = "qcom,rpm-pm8921-regulators";
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
index ea2d961b266b..f1267c83d67a 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
@@ -266,8 +266,6 @@ ssbi@500000 {
pm8921: pmic {
compatible = "qcom,pm8921";
- interrupt-parent = <&msmgpio>;
- interrupts = <104 IRQ_TYPE_LEVEL_LOW>;
#interrupt-cells = <2>;
interrupt-controller;
#address-cells = <1>;
--
2.39.2
