The PMIC is not a part of the SoC, so move PMIC to a separate file and
include it from the board files.
Suggested-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm/boot/dts/qcom/pm8921.dtsi | 40 +++++++++++++++++++
arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts | 1 +
.../qcom/qcom-msm8960-samsung-expressatt.dts | 3 +-
arch/arm/boot/dts/qcom/qcom-msm8960.dtsi | 39 +-----------------
4 files changed, 44 insertions(+), 39 deletions(-)
create mode 100644 arch/arm/boot/dts/qcom/pm8921.dtsi
diff --git a/arch/arm/boot/dts/qcom/pm8921.dtsi b/arch/arm/boot/dts/qcom/pm8921.dtsi
new file mode 100644
index 000000000000..414941f7a42f
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/pm8921.dtsi
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0
+
+&ssbi {
+ pm8921: pmic {
+ compatible = "qcom,pm8921";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pwrkey@1c {
+ compatible = "qcom,pm8921-pwrkey";
+ reg = <0x1c>;
+ interrupt-parent = <&pm8921>;
+ interrupts = <50 IRQ_TYPE_EDGE_RISING>,
+ <51 IRQ_TYPE_EDGE_RISING>;
+ debounce = <15625>;
+ pull-up;
+ };
+
+ pm8921_keypad: keypad@148 {
+ compatible = "qcom,pm8921-keypad";
+ reg = <0x148>;
+ interrupt-parent = <&pm8921>;
+ interrupts = <74 IRQ_TYPE_EDGE_RISING>,
+ <75 IRQ_TYPE_EDGE_RISING>;
+ debounce = <15>;
+ scan-delay = <32>;
+ row-hold = <91500>;
+ };
+
+ rtc@11d {
+ compatible = "qcom,pm8921-rtc";
+ interrupt-parent = <&pm8921>;
+ interrupts = <39 IRQ_TYPE_EDGE_RISING>;
+ reg = <0x11d>;
+ allow-set-time;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts
index 43149c90c4fc..a5ea4843db43 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960-cdp.dts
@@ -2,6 +2,7 @@
#include <dt-bindings/input/input.h>
#include "qcom-msm8960.dtsi"
+#include "pm8921.dtsi"
/ {
model = "Qualcomm MSM8960 CDP";
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
index 9e203164beb6..1a5116336ff0 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
@@ -1,8 +1,9 @@
// SPDX-License-Identifier: GPL-2.0
#include <dt-bindings/input/input.h>
+#include <dt-bindings/reset/qcom,gcc-msm8960.h>
#include "qcom-msm8960.dtsi"
-#include <dt-bindings/reset/qcom,gcc-msm8960.h>
+#include "pm8921.dtsi"
/ {
model = "Samsung Galaxy Express SGH-I437";
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
index f1267c83d67a..774f507fa25a 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
@@ -259,47 +259,10 @@ gsbi5_serial: serial@16440000 {
};
};
- ssbi@500000 {
+ ssbi: ssbi@500000 {
compatible = "qcom,ssbi";
reg = <0x500000 0x1000>;
qcom,controller-type = "pmic-arbiter";
-
- pm8921: pmic {
- compatible = "qcom,pm8921";
- #interrupt-cells = <2>;
- interrupt-controller;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pwrkey@1c {
- compatible = "qcom,pm8921-pwrkey";
- reg = <0x1c>;
- interrupt-parent = <&pm8921>;
- interrupts = <50 IRQ_TYPE_EDGE_RISING>,
- <51 IRQ_TYPE_EDGE_RISING>;
- debounce = <15625>;
- pull-up;
- };
-
- pm8921_keypad: keypad@148 {
- compatible = "qcom,pm8921-keypad";
- reg = <0x148>;
- interrupt-parent = <&pm8921>;
- interrupts = <74 IRQ_TYPE_EDGE_RISING>,
- <75 IRQ_TYPE_EDGE_RISING>;
- debounce = <15>;
- scan-delay = <32>;
- row-hold = <91500>;
- };
-
- rtc@11d {
- compatible = "qcom,pm8921-rtc";
- interrupt-parent = <&pm8921>;
- interrupts = <39 IRQ_TYPE_EDGE_RISING>;
- reg = <0x11d>;
- allow-set-time;
- };
- };
};
rng@1a500000 {
--
2.39.2
