Re: [PATCH] [v2] power/fsl: add MDIO dt binding for FMan

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Thu, 2014-12-18 at 06:53 -0600, Xie Shaohui-B21989 wrote:
> Ping.
> 
> Best Regards, 
> Shaohui Xie

I can't put patches in my -next until the merge window closes.

> > > > +EXAMPLE
> > > > +
> > > > +Example for FMan v2 external MDIO:
> > > > +
> > > > +mdio@f1000 {
> > > > +	compatible = "fsl,fman-xmdio";
> > > > +	reg = <0xf1000 0x1000>;
> > > > +	bus-frequency = <20000>;
> > > > +};
> > >
> > > So the bus frequency is only 20 KHz?  Or is the unit supposed to be
> > > something other than Hz?
> > [S.H] it's only an example, it could be different on real SoCs, but they always
> > lower than the standard one, The standard one is 2.5MHz, I have to use Hz for it.

Is there any SoC for which 20 kHz is the right frequency?  I just want
to make sure the example is realistic.

-Scott


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux