Re: [PATCH] [v2] power/fsl: add MDIO dt binding for FMan

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Fri, 2014-11-14 at 17:53 +0800, shh.xie@xxxxxxxxx wrote:
> From: Shaohui Xie <Shaohui.Xie@xxxxxxxxxxxxx>
> 
> This binding is for FMan MDIO, it covers FMan v2 & FMan v3.
> 
> Signed-off-by: Shaohui Xie <Shaohui.Xie@xxxxxxxxxxxxx>
> ---
> changes in V2:
> addressed comments from Scott in V1.
> 
>  .../devicetree/bindings/powerpc/fsl/fman.txt       | 69 ++++++++++++++++++++++
>  1 file changed, 69 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt b/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
> index edeea16..1523a87 100644
> --- a/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
> +++ b/Documentation/devicetree/bindings/powerpc/fsl/fman.txt
> @@ -7,6 +7,7 @@ CONTENTS
>    - FMan MURAM Node
>    - FMan dTSEC/XGEC/mEMAC Node
>    - FMan IEEE 1588 Node
> +  - FMan MDIO Node
>    - Example
>  
>  =============================================================================
> @@ -357,6 +358,68 @@ ptp-timer@fe000 {
>  };
>  
>  =============================================================================
> +FMan MDIO Node
> +
> +DESCRIPTION
> +
> +The MDIO is a bus to which the PHY devices are connected.
> +
> +PROPERTIES
> +
> +- compatible
> +		Usage: required
> +		Value type: <stringlist>
> +		Definition: A standard property.
> +		Must include "fsl,fman-mdio" for 1 Gb/s MDIO from FMan v2.
> +		Must include "fsl,fman-xmdio" for 10 Gb/s MDIO from FMan v2.
> +		Must include "fsl,fman-memac-mdio" for 1/10 Gb/s MDIO from
> +		FMan v3.
> +
> +- reg
> +		Usage: required
> +		Value type: <prop-encoded-array>
> +		Definition: A standard property.
> +
> +- bus-frequency
> +		Usage: optional
> +		Value type: <u32>
> +		Definition: Specifies external MDIO bus clock speed which is
> +		different from MDIO standard 2.5MHz. Should be defined for SoCs
> +		on which the standard one cannot work.
> +
> +- interrupts
> +		Usage: optional
> +		Value type: <prop-encoded-array>
> +		Definition: Event interrupt of external MDIO controller.
> +		1 Gb/s MDIO and 10 Gb/s MDIO has one interrupt respectively.
> +
> +- fsl,fman-internal-mdio
> +		Usage: required for internal MDIO
> +		Value type: boolean
> +		Definition: Fman has internal MDIO for internal PCS(Physical
> +		Coding Sublayer) PHYs and external MDIO for external PHYs.
> +		The settings and programming routines for internal/external
> +		MDIO are different. Must be included for internal MDIO.
> +
> +EXAMPLE
> +
> +Example for FMan v2 external MDIO:
> +
> +mdio@f1000 {
> +	compatible = "fsl,fman-xmdio";
> +	reg = <0xf1000 0x1000>;
> +	bus-frequency = <20000>;
> +};

So the bus frequency is only 20 KHz?  Or is the unit supposed to be
something other than Hz?

-Scott


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux