[PATCH v11 0/2] ARM: dts: Facebook Yosemite 4 platform

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add linux device tree entry related to
Yosemite 4 specific devices connected to BMC SoC.

Changelog:
v11 - Add imux configs for i2c-mux
    - Add gpio and eeprom devices
    - Remove temperature-sensor 11-004a and 11-004b
    - Change power-sensor ina230 to ina233
v10 - Change to 128MB flash layout from 64MB
 v9 - Remove mac2/mac3 duplicated setting about no-hw-checksum
 v8 - Add description of Yosemite 4
    - Remove unsupported ncsi config
    - Revise i2c-mux config
    - Correct power sensor i2c address
    - Restore i2c 11 bus-frequency to default
 v7 - Revise changelog format
 v6 - Change project name from yosemitev4 to yosemite4
 v5 - Revise rtc setting
    - Remove duplicated multi-master setting
 v4 - Resend with cover letter
 v3 - Revise the bootargs to stdout-path
    - Revise i2c devices
 v2 - Revise the DTS node name
 v1 - Add binding document

Delphine CC Chiu (2):
  dt-bindings: arm: aspeed: add Facebook Yosemite 4 board
  ARM: dts: aspeed: yosemite4: add Facebook Yosemite 4 BMC

 .../bindings/arm/aspeed/aspeed.yaml           |    1 +
 arch/arm/boot/dts/aspeed/Makefile             |    1 +
 .../aspeed/aspeed-bmc-facebook-yosemite4.dts  | 1083 +++++++++++++++++
 3 files changed, 1085 insertions(+)
 create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts

-- 
2.25.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux