[PATCH v4 6/7] LoongArch: dts: DeviceTree for Loongson-2K2000

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add DeviceTree file for Loongson-2K2000 processor, which integrates two
64-bit triple emission superscalar LA364 processor cores.

Signed-off-by: Binbin Zhou <zhoubinbin@xxxxxxxxxxx>
---
 arch/loongarch/boot/dts/Makefile              |   3 +-
 .../boot/dts/loongson-2k2000-ref.dts          |  73 +++++
 arch/loongarch/boot/dts/loongson-2k2000.dtsi  | 291 ++++++++++++++++++
 3 files changed, 366 insertions(+), 1 deletion(-)
 create mode 100644 arch/loongarch/boot/dts/loongson-2k2000-ref.dts
 create mode 100644 arch/loongarch/boot/dts/loongson-2k2000.dtsi

diff --git a/arch/loongarch/boot/dts/Makefile b/arch/loongarch/boot/dts/Makefile
index dc0782315bed..c019d6676f7e 100644
--- a/arch/loongarch/boot/dts/Makefile
+++ b/arch/loongarch/boot/dts/Makefile
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
 
 dtb-$(CONFIG_MACH_LOONGSON64)	= loongson-2k0500-ref.dtb \
-				  loongson-2k1000-ref.dtb
+				  loongson-2k1000-ref.dtb \
+				  loongson-2k2000-ref.dtb
 
 obj-$(CONFIG_BUILTIN_DTB)	+= $(addsuffix .dtb.o, $(CONFIG_BUILTIN_DTB_NAME))
diff --git a/arch/loongarch/boot/dts/loongson-2k2000-ref.dts b/arch/loongarch/boot/dts/loongson-2k2000-ref.dts
new file mode 100644
index 000000000000..27d1e2991aa1
--- /dev/null
+++ b/arch/loongarch/boot/dts/loongson-2k2000-ref.dts
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Loongson Technology Corporation Limited
+ */
+
+/dts-v1/;
+
+#include "loongson-2k2000.dtsi"
+
+/ {
+	compatible = "loongson,ls2k2000-ref", "loongson,ls2k2000";
+	model = "Loongson-2K2000 Reference Board";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+		bootargs = "console=ttyS0,115200";
+	};
+
+	memory@200000 {
+		device_type = "memory";
+		reg = <0x0 0x200000 0x0 0xee00000>, /* 238 MB at 2 MB */
+		      <0x0 0x90000000 0x0 0x70000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			size = <0x0 0x2000000>;
+			linux,cma-default;
+		};
+	};
+};
+
+&sata {
+	status = "okay";
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&rtc0 {
+	status = "okay";
+};
+
+&xhci0 {
+	status = "okay";
+};
+
+&xhci1 {
+	status = "okay";
+};
+
+&gmac0 {
+	status = "okay";
+};
+
+&gmac1 {
+	status = "okay";
+};
+
+&gmac2 {
+	status = "okay";
+};
diff --git a/arch/loongarch/boot/dts/loongson-2k2000.dtsi b/arch/loongarch/boot/dts/loongson-2k2000.dtsi
new file mode 100644
index 000000000000..d4692074394e
--- /dev/null
+++ b/arch/loongarch/boot/dts/loongson-2k2000.dtsi
@@ -0,0 +1,291 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2023 Loongson Technology Corporation Limited
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+		};
+
+		cpu0: cpu@1 {
+			compatible = "loongson,la364";
+			device_type = "cpu";
+			reg = <0x0>;
+			clocks = <&cpu_clk>;
+		};
+
+		cpu1: cpu@2 {
+			compatible = "loongson,la364";
+			device_type = "cpu";
+			reg = <0x1>;
+			clocks = <&cpu_clk>;
+		};
+	};
+
+	cpu_clk: cpu-clk {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1200000000>;
+	};
+
+	cpuintc: interrupt-controller {
+		compatible = "loongson,cpu-interrupt-controller";
+		#interrupt-cells = <1>;
+		interrupt-controller;
+	};
+
+	bus@10000000 {
+		compatible = "simple-bus";
+		ranges = <0x0 0x10000000 0x0 0x10000000 0x0 0x10000000>,
+			 <0x0 0x2000000  0x0 0x2000000  0x0 0x2000000>,
+			 <0x0 0x40000000 0x0 0x40000000 0x0 0x40000000>,
+			 <0xfe 0x0 0xfe 0x0 0x0 0x40000000>;
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		liointc: interrupt-controller@1fe01400 {
+			compatible = "loongson,liointc-1.0";
+			reg = <0x0 0x1fe01400 0x0 0x64>;
+
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>;
+			interrupt-names = "int0";
+			loongson,parent_int_map = <0xffffffff>, /* int0 */
+						  <0x00000000>, /* int1 */
+						  <0x00000000>, /* int2 */
+						  <0x00000000>; /* int3 */
+		};
+
+		eiointc: interrupt-controller@1fe01600 {
+			compatible = "loongson,ls2k2000-eiointc";
+			reg = <0x0 0x1fe01600 0x0 0xea00>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&cpuintc>;
+			interrupts = <3>;
+		};
+
+		pic: interrupt-controller@10000000 {
+			compatible = "loongson,pch-pic-1.0";
+			reg = <0x0 0x10000000 0x0 0x400>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			loongson,pic-base-vec = <0>;
+			interrupt-parent = <&eiointc>;
+		};
+
+		msi: msi-controller@1fe01140 {
+			compatible = "loongson,pch-msi-1.0";
+			reg = <0x0 0x1fe01140 0x0 0x8>;
+			msi-controller;
+			loongson,msi-base-vec = <64>;
+			loongson,msi-num-vecs = <192>;
+			interrupt-parent = <&eiointc>;
+		};
+
+		rtc0: rtc@100d0100 {
+			compatible = "loongson,ls2k2000-rtc", "loongson,ls7a-rtc";
+			reg = <0x0 0x100d0100 0x0 0x100>;
+			interrupt-parent = <&pic>;
+			interrupts = <52 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		uart0: serial@1fe001e0 {
+			compatible = "ns16550a";
+			reg = <0x0 0x1fe001e0 0x0 0x10>;
+			clock-frequency = <100000000>;
+			interrupt-parent = <&liointc>;
+			interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
+			no-loopback-test;
+			status = "disabled";
+		};
+
+		pcie@1a000000 {
+			compatible = "loongson,ls2k-pci";
+			reg = <0x0 0x1a000000 0x0 0x02000000>,
+			      <0xfe 0x0 0x0 0x20000000>;
+
+			ranges = <0x2000000 0x0 0x60000000 0x0 0x60000000 0x0 0x20000000>,
+				 <0x1000000 0x0 0x8000 0x0 0x18400000 0x0 0x8000>;
+
+			device_type = "pci";
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			gmac0: ethernet@3,0 {
+				reg = <0x1800 0x0 0x0 0x0 0x0>;
+				interrupts = <12 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+				status = "disabled";
+			};
+
+			gmac1: ethernet@3,1 {
+				reg = <0x1900 0x0 0x0 0x0 0x0>;
+				interrupts = <14 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+				status = "disabled";
+			};
+
+			gmac2: ethernet@3,2 {
+				reg = <0x1a00 0x0 0x0 0x0 0x0>;
+				interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+				status = "disabled";
+			};
+
+			xhci0: usb@4,0 {
+				reg = <0x2000 0x0 0x0 0x0 0x0>;
+				interrupts = <48 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+				status = "disabled";
+			};
+
+			xhci1: usb@19,0 {
+				reg = <0xc800 0x0 0x0 0x0 0x0>;
+				interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+				status = "disabled";
+			};
+
+			display@6,1 {
+				reg = <0x3100 0x0 0x0 0x0 0x0>;
+				interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+				status = "disabled";
+			};
+
+			hda@7,0 {
+				reg = <0x3800 0x0 0x0 0x0 0x0>;
+				interrupts = <58 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+				status = "disabled";
+			};
+
+			sata: sata@8,0 {
+				reg = <0x4000 0x0 0x0 0x0 0x0>;
+				interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-parent = <&pic>;
+				status = "disabled";
+			};
+
+			pcie@9,0 {
+				reg = <0x4800 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&pic>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &pic 32 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@a,0 {
+				reg = <0x5000 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&pic>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &pic 33 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@b,0 {
+				reg = <0x5800 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&pic>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &pic 34 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@c,0 {
+				reg = <0x6000 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&pic>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &pic 35 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@d,0 {
+				reg = <0x6800 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&pic>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &pic 36 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@e,0 {
+				reg = <0x7000 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&pic>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &pic 37 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@f,0 {
+				reg = <0x7800 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&pic>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &pic 40 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+
+			pcie@10,0 {
+				reg = <0x8000 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				device_type = "pci";
+				interrupt-parent = <&pic>;
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+				interrupt-map = <0x0 0x0 0x0 0x0 &pic 30 IRQ_TYPE_LEVEL_HIGH>;
+				ranges;
+			};
+		};
+	};
+};
-- 
2.39.3




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux