[PATCH v2 10/16] arm64: dts: qcom: msm8998: switch USB QMP PHY to new style of bindings

[Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>]

Change the USB QMP PHY to use newer style of QMP PHY bindings (single
resource region, no per-PHY subnodes).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/msm8998.dtsi | 39 +++++++++++----------------
 1 file changed, 16 insertions(+), 23 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 30d8730fa4de..46a6ef0e454b 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -979,12 +979,12 @@ pcie_phy: phy@1c06000 {
 			status = "disabled";
 
 			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
-				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_CLKREF_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
 				 <&gcc GCC_PCIE_0_PIPE_CLK>;
 			clock-names = "aux",
-				      "cfg_ahb",
 				      "ref",
+				      "cfg_ahb",
 				      "pipe";
 
 			clock-output-names = "pcie_0_pipe_clk_src";
@@ -2138,7 +2138,7 @@ usb3_dwc3: usb@a800000 {
 				interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
-				phys = <&qusb2phy>, <&usb1_ssphy>;
+				phys = <&qusb2phy>, <&usb3phy>;
 				phy-names = "usb2-phy", "usb3-phy";
 				snps,has-lpm-erratum;
 				snps,hird-threshold = /bits/ 8 <0x10>;
@@ -2147,33 +2147,26 @@ usb3_dwc3: usb@a800000 {
 
 		usb3phy: phy@c010000 {
 			compatible = "qcom,msm8998-qmp-usb3-phy";
-			reg = <0x0c010000 0x18c>;
-			status = "disabled";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
+			reg = <0x0c010000 0x1000>;
 
 			clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+				 <&gcc GCC_USB3_CLKREF_CLK>,
 				 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-				 <&gcc GCC_USB3_CLKREF_CLK>;
-			clock-names = "aux", "cfg_ahb", "ref";
+				 <&gcc GCC_USB3_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "cfg_ahb",
+				      "pipe";
+			clock-output-names = "usb3_phy_pipe_clk_src";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
 
 			resets = <&gcc GCC_USB3_PHY_BCR>,
 				 <&gcc GCC_USB3PHY_PHY_BCR>;
-			reset-names = "phy", "common";
+			reset-names = "phy",
+				      "phy_phy";
 
-			usb1_ssphy: phy@c010200 {
-				reg = <0xc010200 0x128>,
-				      <0xc010400 0x200>,
-				      <0xc010c00 0x20c>,
-				      <0xc010600 0x128>,
-				      <0xc010800 0x200>;
-				#phy-cells = <0>;
-				#clock-cells = <0>;
-				clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
-				clock-names = "pipe0";
-				clock-output-names = "usb3_phy_pipe_clk_src";
-			};
+			status = "disabled";
 		};
 
 		qusb2phy: phy@c012000 {
-- 
2.39.2