Unfortunately, as mentioned in a comment under a different node in the
device tree, the pinctrl driver's naming doesn't really match up with
actual QUP indices..
Assign the correct one for I2C10.
Fixes: 704edf03c022 ("arm64: dts: qcom: sm6375: Add pin configs for some QUP configurations")
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm6375.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi
index e7ff55443da7..4364b144eb93 100644
--- a/arch/arm64/boot/dts/qcom/sm6375.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi
@@ -885,7 +885,7 @@ qup_i2c8_default: qup-i2c8-default-state {
qup_i2c10_default: qup-i2c10-default-state {
pins = "gpio4", "gpio5";
- function = "qup10";
+ function = "qup14";
drive-strength = <2>;
bias-pull-up;
};
--
2.41.0
