Re: [PATCH RFC v2 1/4] dt-bindings: mmc: sdhci-of-dwcmhsc: Add T-Head TH1520 support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Aug 07, 2023 at 08:29:21AM +0200, Krzysztof Kozlowski wrote:
> On 05/08/2023 05:14, Drew Fustini wrote:
> > Add compatible value for the T-Head TH1520 dwcmshc controller and
> > thead,io-fixed-1v8 and thead,pull-up properties.
> > 
> > Signed-off-by: Drew Fustini <dfustini@xxxxxxxxxxxx>
> > ---
> >  Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml | 9 +++++++++
> >  1 file changed, 9 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml b/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml
> > index a43eb837f8da..57602c345cab 100644
> > --- a/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml
> > +++ b/Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml
> > @@ -19,6 +19,7 @@ properties:
> >        - rockchip,rk3568-dwcmshc
> >        - rockchip,rk3588-dwcmshc
> >        - snps,dwcmshc-sdhci
> > +      - thead,th1520-dwcmshc
> >  
> >    reg:
> >      maxItems: 1
> > @@ -60,6 +61,14 @@ properties:
> >      description: Specify the number of delay for tx sampling.
> >      $ref: /schemas/types.yaml#/definitions/uint8
> >  
> > +  thead,io-fixed-1v8:
> > +    description: SoC PHY pad is fixed 1.8V
> > +    type: boolean
> 
> Isn't this duplicating existing properties for MMC modes with 1.8 V?

Thank you for reviewing. Yes, now that you mention it, I do see those
properties now in mmc-controller.yaml. It seems like the existing
mmc-ddr-1_8v property would be appropriate.

> 
> > +
> > +  thead,pull-up:
> > +    description: True if pull-up, false if pull-down
> 
> This explains me nothing. No clue what you are pulling and why do you
> need it. Pin pulls should be done via pin controller, not MMC.

Good point that my description is not helpful. The pull-up property
determines whether certain phy registers are written to. I need to try
to can get documentation on the phy so that I can better understand the
details of the pull-up configuration in the phy registers.

> 
> Anyway you should have here allOf:if:then (move the allOf: from top to
> behind "required:") which will disallow these properties for other variants.

I noticed that nvidia,tegra20-sdhci.yaml has several lines related to
pull-up/down configuration:

218   - if:
219       properties:
220         compatible:
221           contains:
222             const: nvidia,tegra210-sdhci
223     then:
224       properties:
225         pinctrl-names:
226           oneOf:
227             - items:
228                 - const: sdmmc-3v3
229                   description: pad configuration for 3.3 V
230                 - const: sdmmc-1v8
231                   description: pad configuration for 1.8 V
232                 - const: sdmmc-3v3-drv
233                   description: pull-up/down configuration for 3.3 V
234                 - const: sdmmc-1v8-drv
235                   description: pull-up/down configuration for 1.8 V
236             - items:
237                 - const: sdmmc-3v3-drv
238                   description: pull-up/down configuration for 3.3 V
239                 - const: sdmmc-1v8-drv
240                   description: pull-up/down configuration for 1.8 V
241             - items:
242                 - const: sdmmc-1v8-drv
243                   description: pull-up/down configuration for 1.8 V

Do you think creating something like that would be a good approach?

Thank you,
Drew



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux