On 21.07.2023 14:54, Johan Hovold wrote:
> On Fri, Jul 21, 2023 at 02:10:07PM +0200, Konrad Dybcio wrote:
>> On 21.07.2023 13:16, Johan Hovold wrote:
>>> On Fri, Jul 14, 2023 at 04:08:45PM +0530, Krishna Kurapati PSSNV wrote:
>>>> On 7/14/2023 2:30 PM, Johan Hovold wrote:
>>>>> On Mon, Jul 03, 2023 at 12:35:48AM +0530, Krishna Kurapati PSSNV wrote:
>>>>>> On 6/27/2023 9:13 PM, Johan Hovold wrote:
>>>>>>> On Wed, Jun 07, 2023 at 02:16:37PM +0200, Johan Hovold wrote:
>>>>>>>> On Sun, May 14, 2023 at 11:19:14AM +0530, Krishna Kurapati wrote:
>>>>>
>>>>>>>>> - val = readl(qcom->qscratch_base + PWR_EVNT_IRQ_STAT_REG);
>>>>>>>>> - if (!(val & PWR_EVNT_LPM_IN_L2_MASK))
>>>>>>>>> - dev_err(qcom->dev, "HS-PHY not in L2\n");
>>>>>>>>> + for (i = 0; i < dwc->num_usb2_ports; i++) {
>>>>>>>>> + val = readl(qcom->qscratch_base + pwr_evnt_irq_stat_reg_offset[i]);
>>>>>>>>> + if (!(val & PWR_EVNT_LPM_IN_L2_MASK))
>>>>>>>>> + dev_err(qcom->dev, "HS-PHY%d not in L2\n", i);
>>>>>>>>> + }
>>>>>>>
>>>>>>>> When testing this on the X13s I get:
>>>>>>>>
>>>>>>>> dwc3-qcom a4f8800.usb: HS-PHY2 not in L2
>
>> Sidenote, I get this on any Qcom device on any platform I try
>> to enter suspend on, without these MP patches.
>
> Ok, that might provide some hint. But on sc8280xp (X13s) we only get it
> on one of the four MP ports (i.e. on one out of six ports in total).
>
> While on sa8295p-adp there are no such errors on any port.
I've been playing with 8450 and it looks like snps,dis_u2_susphy_quirk
causes this error.
The downstream tree contains this property and I'm inclined to believe
it means that this platforms should define it (as the devicetrees are
machine-generated to a degree, AFAIK), especially since this quirk does
the exact same thing on a known-working downstream, namely unsetting
DWC3_GUSB2PHYCFG_SUSPHY.
Digging a bit deeper, dwc3-msm-core [1], the downstream version of dwc3-qcom
performs a bit of a dance in a couple of places.. Look for that register name.
Unfortunately I have little idea what the "USB2 suspend phy" is.. is it a PHY
used in suspend? Is it the suspension of the USB2 PHY? No clue.
[1] https://git.codelinaro.org/clo/la/kernel/msm-5.10/-/blob/KERNEL.PLATFORM.1.0.r2-08800-WAIPIOLE.0/drivers/usb/dwc3/dwc3-msm-core.c
Konrad
