Re: [PATCH] arm64: dts: imx8mp: Improve VPU clock configuration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Aug 10, 2023 at 2:42 AM Marco Felsch <m.felsch@xxxxxxxxxxxxxx> wrote:
>
> Hi Marek,
>
> On 23-08-10, Marek Vasut wrote:
> > Update VPU clock according to reference manual to improve performance.
> > i.MX 8M Plus Applications Processor Reference Manual, Rev. 1, 06/2021
> >
> > Table 5-1. Clock Root Table (continued) reads as follows:
> > Clock Root ............... Max Freq (MHz)
> > VPU_BUS_CLK_ROOT ......... 800
> > VPU_G1_CLK_ROOT .......... 800
> > VPU_G2_CLK_ROOT .......... 700
> >
> > 5.1.5.1 Input Clocks
> > Input Clock .............. Frequency (MHz)
> > VPU_PLL_CLK .............. 800
>
> Acoording the datasheet not the reference manual, this would be the
> overdrive mode now. Can we ensure that VDD_SOC is in overdrive state?

Shoot, I explicitly searched the TRM for overdrive, because I remember
this coming before with either the 8MQ or 8MM, but I couldn't
remember.  I forgot all about the actual datasheet.

The operating-points for the various voltage rails would have to
increase to get this into overdrive mode.  I think this would have to
be done on a per-board basis if memory serves when this came up
before.  :-(

adam
>
> Regards,
>   Marco
>
> > The VPU G1 and VPU bus is now supplied from PLL1 which provides 800 MHz
> > on one of its outputs, the VPU G2 is supplied from VPU PLL with 700 MHz
> > which is a perfect fit for this setup. This also matches the NXP kernel
> > fork configuration.
> >
> > Signed-off-by: Marek Vasut <marex@xxxxxxx>
> > ---
> > Cc: Adam Ford <aford173@xxxxxxxxx>
> > Cc: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
> > Cc: Conor Dooley <conor+dt@xxxxxxxxxx>
> > Cc: Fabio Estevam <festevam@xxxxxxxxx>
> > Cc: Frank Li <Frank.Li@xxxxxxx>
> > Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@xxxxxxxxxx>
> > Cc: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> > Cc: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
> > Cc: Marek Vasut <marex@xxxxxxx>
> > Cc: NXP Linux Team <linux-imx@xxxxxxx>
> > Cc: Peng Fan <peng.fan@xxxxxxx>
> > Cc: Pengutronix Kernel Team <kernel@xxxxxxxxxxxxxx>
> > Cc: Richard Cochran <richardcochran@xxxxxxxxx>
> > Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> > Cc: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
> > Cc: Shawn Guo <shawnguo@xxxxxxxxxx>
> > Cc: devicetree@xxxxxxxxxxxxxxx
> > Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> > ---
> >  arch/arm64/boot/dts/freescale/imx8mp.dtsi | 12 ++++++------
> >  1 file changed, 6 insertions(+), 6 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > index 6f2f50e1639c3..77974bd6da63a 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> > @@ -1928,8 +1928,8 @@ vpu_g1: video-codec@38300000 {
> >                       interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> >                       clocks = <&clk IMX8MP_CLK_VPU_G1_ROOT>;
> >                       assigned-clocks = <&clk IMX8MP_CLK_VPU_G1>;
> > -                     assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>;
> > -                     assigned-clock-rates = <600000000>;
> > +                     assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
> > +                     assigned-clock-rates = <800000000>;
> >                       power-domains = <&vpumix_blk_ctrl IMX8MP_VPUBLK_PD_G1>;
> >               };
> >
> > @@ -1939,8 +1939,8 @@ vpu_g2: video-codec@38310000 {
> >                       interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
> >                       clocks = <&clk IMX8MP_CLK_VPU_G2_ROOT>;
> >                       assigned-clocks = <&clk IMX8MP_CLK_VPU_G2>;
> > -                     assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>;
> > -                     assigned-clock-rates = <500000000>;
> > +                     assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>;
> > +                     assigned-clock-rates = <700000000>;
> >                       power-domains = <&vpumix_blk_ctrl IMX8MP_VPUBLK_PD_G2>;
> >               };
> >
> > @@ -1956,8 +1956,8 @@ vpumix_blk_ctrl: blk-ctrl@38330000 {
> >                                <&clk IMX8MP_CLK_VPU_VC8KE_ROOT>;
> >                       clock-names = "g1", "g2", "vc8000e";
> >                       assigned-clocks = <&clk IMX8MP_CLK_VPU_BUS>, <&clk IMX8MP_VPU_PLL>;
> > -                     assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>;
> > -                     assigned-clock-rates = <600000000>, <600000000>;
> > +                     assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
> > +                     assigned-clock-rates = <800000000>, <700000000>;
> >                       interconnects = <&noc IMX8MP_ICM_VPU_G1 &noc IMX8MP_ICN_VIDEO>,
> >                                       <&noc IMX8MP_ICM_VPU_G2 &noc IMX8MP_ICN_VIDEO>,
> >                                       <&noc IMX8MP_ICM_VPU_H1 &noc IMX8MP_ICN_VIDEO>;
> > --
> > 2.40.1
> >
> >
> >




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux