Update VPU clock according to reference manual to improve performance.
i.MX 8M Plus Applications Processor Reference Manual, Rev. 1, 06/2021
Table 5-1. Clock Root Table (continued) reads as follows:
Clock Root ............... Max Freq (MHz)
VPU_BUS_CLK_ROOT ......... 800
VPU_G1_CLK_ROOT .......... 800
VPU_G2_CLK_ROOT .......... 700
5.1.5.1 Input Clocks
Input Clock .............. Frequency (MHz)
VPU_PLL_CLK .............. 800
The VPU G1 and VPU bus is now supplied from PLL1 which provides 800 MHz
on one of its outputs, the VPU G2 is supplied from VPU PLL with 700 MHz
which is a perfect fit for this setup. This also matches the NXP kernel
fork configuration.
Signed-off-by: Marek Vasut <marex@xxxxxxx>
---
Cc: Adam Ford <aford173@xxxxxxxxx>
Cc: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
Cc: Conor Dooley <conor+dt@xxxxxxxxxx>
Cc: Fabio Estevam <festevam@xxxxxxxxx>
Cc: Frank Li <Frank.Li@xxxxxxx>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@xxxxxxxxxx>
Cc: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
Cc: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
Cc: Marek Vasut <marex@xxxxxxx>
Cc: NXP Linux Team <linux-imx@xxxxxxx>
Cc: Peng Fan <peng.fan@xxxxxxx>
Cc: Pengutronix Kernel Team <kernel@xxxxxxxxxxxxxx>
Cc: Richard Cochran <richardcochran@xxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Cc: Shawn Guo <shawnguo@xxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
---
arch/arm64/boot/dts/freescale/imx8mp.dtsi | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index 6f2f50e1639c3..77974bd6da63a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -1928,8 +1928,8 @@ vpu_g1: video-codec@38300000 {
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MP_CLK_VPU_G1_ROOT>;
assigned-clocks = <&clk IMX8MP_CLK_VPU_G1>;
- assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>;
- assigned-clock-rates = <600000000>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
+ assigned-clock-rates = <800000000>;
power-domains = <&vpumix_blk_ctrl IMX8MP_VPUBLK_PD_G1>;
};
@@ -1939,8 +1939,8 @@ vpu_g2: video-codec@38310000 {
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MP_CLK_VPU_G2_ROOT>;
assigned-clocks = <&clk IMX8MP_CLK_VPU_G2>;
- assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>;
- assigned-clock-rates = <500000000>;
+ assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>;
+ assigned-clock-rates = <700000000>;
power-domains = <&vpumix_blk_ctrl IMX8MP_VPUBLK_PD_G2>;
};
@@ -1956,8 +1956,8 @@ vpumix_blk_ctrl: blk-ctrl@38330000 {
<&clk IMX8MP_CLK_VPU_VC8KE_ROOT>;
clock-names = "g1", "g2", "vc8000e";
assigned-clocks = <&clk IMX8MP_CLK_VPU_BUS>, <&clk IMX8MP_VPU_PLL>;
- assigned-clock-parents = <&clk IMX8MP_VPU_PLL_OUT>;
- assigned-clock-rates = <600000000>, <600000000>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>;
+ assigned-clock-rates = <800000000>, <700000000>;
interconnects = <&noc IMX8MP_ICM_VPU_G1 &noc IMX8MP_ICN_VIDEO>,
<&noc IMX8MP_ICM_VPU_G2 &noc IMX8MP_ICN_VIDEO>,
<&noc IMX8MP_ICM_VPU_H1 &noc IMX8MP_ICN_VIDEO>;
--
2.40.1
