From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
Add a node for the SerDes PHY used by EMAC1 on sa8775p-ride.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
Reviewed-by: Andrew Halaney <ahalaney@xxxxxxxxxx>
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sa8775p.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index 7b55cb701472..38d10af37ab0 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -1846,6 +1846,15 @@ serdes0: phy@8901000 {
status = "disabled";
};
+ serdes1: phy@8902000 {
+ compatible = "qcom,sa8775p-dwmac-sgmii-phy";
+ reg = <0x0 0x08902000 0x0 0xe10>;
+ clocks = <&gcc GCC_SGMI_CLKREF_EN>;
+ clock-names = "sgmi_ref";
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
pdc: interrupt-controller@b220000 {
compatible = "qcom,sa8775p-pdc", "qcom,pdc";
reg = <0x0 0x0b220000 0x0 0x30000>,
--
2.39.2
