Hello all, Similar to a couple previous series on this, we disable by default nodes that cannot function standalone. This helps prevent folks from forgetting to disable unused nodes in their boards. One benefit of that is you can start out with an almost empty DTS file for a new board and have it still function without warnings or misbehaving hardware. Adding as you go, this helps ease bringup and upstreaming of new boards. Thanks, Andrew Changes for v3: - Add enables for tqma64xxl (AM64 based) Changes for v2: - Added Reviewed-bys (thanks Dhruva) - Removed "default pins" comments for GPIO - Reworded message for 12/13 to make it more clear on dtsi files Andrew Davis (13): arm64: dts: ti: k3-j721e: Enable SDHCI nodes at the board level arm64: dts: ti: k3-j7200: Enable SDHCI nodes at the board level arm64: dts: ti: k3-j721s2: Enable SDHCI nodes at the board level arm64: dts: ti: k3-am65: Enable OSPI nodes at the board level arm64: dts: ti: k3-j721e: Enable OSPI nodes at the board level arm64: dts: ti: k3-j7200: Enable OSPI nodes at the board level arm64: dts: ti: k3-am64: Enable OSPI nodes at the board level arm64: dts: ti: k3-j721e: Enable GPIO nodes at the board level arm64: dts: ti: k3-j721s2: Enable GPIO nodes at the board level arm64: dts: ti: k3-j7200: Enable GPIO nodes at the board level arm64: dts: ti: k3-j721e: Enable TSCADC nodes at the board level arm64: dts: ti: k3-am65: Enable TSCADC nodes at the board level arm64: dts: ti: k3-am64: Enable TSCADC nodes at the board level arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 2 + .../boot/dts/ti/k3-am64-phycore-som.dtsi | 1 + arch/arm64/boot/dts/ti/k3-am642-evm.dts | 1 + arch/arm64/boot/dts/ti/k3-am642-sk.dts | 5 +- .../dts/ti/k3-am642-tqma64xxl-mbax4xxl.dts | 1 + .../arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi | 1 + .../boot/dts/ti/k3-am65-iot2050-common.dtsi | 6 +- arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi | 4 ++ .../arm64/boot/dts/ti/k3-am654-base-board.dts | 3 + .../boot/dts/ti/k3-am68-sk-base-board.dts | 24 +------- .../dts/ti/k3-j7200-common-proc-board.dts | 19 ++---- arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 6 ++ .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 3 + arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi | 1 + .../boot/dts/ti/k3-j721e-beagleboneai64.dts | 60 ++++--------------- .../dts/ti/k3-j721e-common-proc-board.dts | 42 ++++--------- arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 11 ++++ .../boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 6 ++ arch/arm64/boot/dts/ti/k3-j721e-sk.dts | 57 ++---------------- arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi | 1 + .../dts/ti/k3-j721s2-common-proc-board.dts | 18 ++---- arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 6 ++ .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 2 + 23 files changed, 93 insertions(+), 187 deletions(-) -- 2.39.2
