From: Apelete Seketeli <aseketeli@xxxxxxxxxxxx>
This patch fixes the interrupt range for wakeup and main domain gpio
interrupt routers. They were wrongly subtracted by 32 instead of
following what is defined in the interrupt map in the TRM (Table 9-35).
Fixes: 4664ebd8346a ("arm64: dts: ti: Add initial support for J784S4 SoC")
Link: https://www.ti.com/lit/ug/spruj52c/spruj52c.pdf
Signed-off-by: Apelete Seketeli <aseketeli@xxxxxxxxxxxx>
Signed-off-by: Esteban Blanc <eblanc@xxxxxxxxxxxx>
Signed-off-by: Jai Luthra <j-luthra@xxxxxx>
---
arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 2 +-
arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
index a04c44708a09..013cf4ed98d8 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
@@ -60,7 +60,7 @@ main_gpio_intr: interrupt-controller@a00000 {
#interrupt-cells = <1>;
ti,sci = <&sms>;
ti,sci-dev-id = <10>;
- ti,interrupt-ranges = <8 360 56>;
+ ti,interrupt-ranges = <8 392 56>;
};
main_pmx0: pinctrl@11c000 {
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
index 740ee794d7b9..77a45f97e28b 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
@@ -107,7 +107,7 @@ wkup_gpio_intr: interrupt-controller@42200000 {
#interrupt-cells = <1>;
ti,sci = <&sms>;
ti,sci-dev-id = <177>;
- ti,interrupt-ranges = <16 928 16>;
+ ti,interrupt-ranges = <16 960 16>;
};
/* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */
--
2.41.0
