Hi Udit,
On 09/08/23 10:31, Udit Kumar wrote:
> After splitting wkup_pmx pin mux for J784S4 into four regions.
> Pin mux offset for ADC nodes were not updated to align with new
> regions, due to this while probing ADC driver out of range
> error was seen.
>
> Pin mux offsets for ADC nodes are corrected in this patch.
>
> Fixes: 14462bd0b247 ("arm64: dts: ti: k3-j784s4: Fix wakeup pinmux range and pinctrl node offsets")
> Signed-off-by: Udit Kumar <u-kumar1@xxxxxx>
> ---
> Reviewed pin mux for J784S4-EVM, AM69, J721S2-EVM and AM68
> ADC seems to be last one to be fixed.
>
> In order to test this patch
> following drivers were built in as part of kernel
> CONFIG_MFD_TI_AM335X_TSCADC=y
> CONFIG_TI_AM335X_ADC=y
>
> dtbs_check is done after applying
> https://lore.kernel.org/all/20230721082654.27036-1-tony@xxxxxxxxxxx/
>
> logs with patch
> https://gist.github.com/uditkumarti/54db4d5e49467442e1698e5af82d787b#file-with_patch
> (line 1128 and 1130)
>
> Original logs
> https://gist.github.com/uditkumarti/54db4d5e49467442e1698e5af82d787b#file-original_logs
> (line 942 and 946)
>
> arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 32 ++++++++++++------------
> 1 file changed, 16 insertions(+), 16 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
> index edc1009b2d1e..b4ffa720209c 100644
> --- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
> +++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
> @@ -340,27 +340,27 @@ J784S4_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (B35) MCU_MDIO0_MDIO */
>
> mcu_adc0_pins_default: mcu-adc0-default-pins {
> pinctrl-single,pins = <
> - J784S4_WKUP_IOPAD(0x134, PIN_INPUT, 0) /* (P36) MCU_ADC0_AIN0 */
> - J784S4_WKUP_IOPAD(0x138, PIN_INPUT, 0) /* (V36) MCU_ADC0_AIN1 */
> - J784S4_WKUP_IOPAD(0x13c, PIN_INPUT, 0) /* (T34) MCU_ADC0_AIN2 */
> - J784S4_WKUP_IOPAD(0x140, PIN_INPUT, 0) /* (T36) MCU_ADC0_AIN3 */
> - J784S4_WKUP_IOPAD(0x144, PIN_INPUT, 0) /* (P34) MCU_ADC0_AIN4 */
> - J784S4_WKUP_IOPAD(0x148, PIN_INPUT, 0) /* (R37) MCU_ADC0_AIN5 */
> - J784S4_WKUP_IOPAD(0x14c, PIN_INPUT, 0) /* (R33) MCU_ADC0_AIN6 */
> - J784S4_WKUP_IOPAD(0x150, PIN_INPUT, 0) /* (V38) MCU_ADC0_AIN7 */
> + J784S4_WKUP_IOPAD(0x0cc, PIN_INPUT, 0) /* (P36) MCU_ADC0_AIN0 */
> + J784S4_WKUP_IOPAD(0x0d0, PIN_INPUT, 0) /* (V36) MCU_ADC0_AIN1 */
> + J784S4_WKUP_IOPAD(0x0d4, PIN_INPUT, 0) /* (T34) MCU_ADC0_AIN2 */
> + J784S4_WKUP_IOPAD(0x0d8, PIN_INPUT, 0) /* (T36) MCU_ADC0_AIN3 */
> + J784S4_WKUP_IOPAD(0x0dc, PIN_INPUT, 0) /* (P34) MCU_ADC0_AIN4 */
> + J784S4_WKUP_IOPAD(0x0e0, PIN_INPUT, 0) /* (R37) MCU_ADC0_AIN5 */
> + J784S4_WKUP_IOPAD(0x0e4, PIN_INPUT, 0) /* (R33) MCU_ADC0_AIN6 */
> + J784S4_WKUP_IOPAD(0x0e8, PIN_INPUT, 0) /* (V38) MCU_ADC0_AIN7 */
> >;
> };
>
> mcu_adc1_pins_default: mcu-adc1-default-pins {
> pinctrl-single,pins = <
> - J784S4_WKUP_IOPAD(0x154, PIN_INPUT, 0) /* (Y38) MCU_ADC1_AIN0 */
> - J784S4_WKUP_IOPAD(0x158, PIN_INPUT, 0) /* (Y34) MCU_ADC1_AIN1 */
> - J784S4_WKUP_IOPAD(0x15c, PIN_INPUT, 0) /* (V34) MCU_ADC1_AIN2 */
> - J784S4_WKUP_IOPAD(0x160, PIN_INPUT, 0) /* (W37) MCU_ADC1_AIN3 */
> - J784S4_WKUP_IOPAD(0x164, PIN_INPUT, 0) /* (AA37) MCU_ADC1_AIN4 */
> - J784S4_WKUP_IOPAD(0x168, PIN_INPUT, 0) /* (W33) MCU_ADC1_AIN5 */
> - J784S4_WKUP_IOPAD(0x16c, PIN_INPUT, 0) /* (U33) MCU_ADC1_AIN6 */
> - J784S4_WKUP_IOPAD(0x170, PIN_INPUT, 0) /* (Y36) MCU_ADC1_AIN7 */
> + J784S4_WKUP_IOPAD(0x0ec, PIN_INPUT, 0) /* (Y38) MCU_ADC1_AIN0 */
> + J784S4_WKUP_IOPAD(0x0f0, PIN_INPUT, 0) /* (Y34) MCU_ADC1_AIN1 */
> + J784S4_WKUP_IOPAD(0x0f4, PIN_INPUT, 0) /* (V34) MCU_ADC1_AIN2 */
> + J784S4_WKUP_IOPAD(0x0f8, PIN_INPUT, 0) /* (W37) MCU_ADC1_AIN3 */
> + J784S4_WKUP_IOPAD(0x0fc, PIN_INPUT, 0) /* (AA37) MCU_ADC1_AIN4 */
> + J784S4_WKUP_IOPAD(0x100, PIN_INPUT, 0) /* (W33) MCU_ADC1_AIN5 */
> + J784S4_WKUP_IOPAD(0x104, PIN_INPUT, 0) /* (U33) MCU_ADC1_AIN6 */
> + J784S4_WKUP_IOPAD(0x108, PIN_INPUT, 0) /* (Y36) MCU_ADC1_AIN7 */
Thank you for the fix,
Reviewed-by: Vaishnav Achath <vaishnav.a@xxxxxx>
Thanks and Regards,
Vaishnav
> >;
> };
> };
