On 14:15-20230809, Aradhya Bhatia wrote: > Hi all, > > The patch series adds DT nodes for Display SubSystem (DSS) and other > peripherals required to enable the HDMI audio and video on the AM625 SK, > AM62-LP SK, as well as the AM625 based Beagle-Play platforms. An HDMI > monitor can be connected to the boards for the audio/video outputs. > > The series adding the compatible and basic driver support[0] is in the > drm-misc-next and linux-next queues and is expected to be in the > mainline by v6.6-rc1. Patch 5/6 also requires Nishanth Menon's patch[1] > that introduces debounce select mux macros. This patch too is not in > v6.5-rc1 but has been picked up in ti-next[2] and hence, is present in > linux-next. > > Patches 4 and 5 have been picked up from TI's vendor tree[3] based off > linux-kernel v6.1. > > Regards > Aradhya > > Change Log: > V4 -> V5: > - Cosmetic changes as suggested by Jayesh. > - Fixed the mis-represented DSS VP1 clock, and added a > fixed-factor-clock. > > V3 -> V4: > - Added "Fixes" tag for patch 1/6. > - Rebased to linux-next. > - Enabled display at board level and disabled at SoC level. > - Dropped OLDI pinmux configuration as OLDI output comes directly from > the SoC and muxing is not required. > - Squashed DSS pinmux patches into their platform specific HDMI > support patches, because it did not make sense to have only one set > of pinmux config separated in a patch. > > V2 -> V3: > - Updated the compatible from "ti,am65x-dss" to "ti,am625-dss". > - Peripheral nodes like HDMI TX, HDMI connector are now added to > k3-am62x-sk-common.dtsi instead of k3-am625-sk.dts, in order to > support AM62-LP SK-EVM as well. > - Dropped the HDMI master clock node as it is not connected on the > EVM, and should not have been added in the first place. > - Re-worded and Re-ordered commits. > - Dropped Rahul Ravikumar's R-bs because of the changes. > - Added AM625 based Beagle-Play for HDMI support. > - Added HDMI audio support as well. > > V1 -> V2: > - Removed repetitive data in dss_ports > > V4: https://lore.kernel.org/all/20230807153307.22174-1-a-bhatia1@xxxxxx/ > V3: https://lore.kernel.org/all/20230728173438.12995-1-a-bhatia1@xxxxxx/ > V2: https://lore.kernel.org/all/20220505134303.23208-1-a-bhatia1@xxxxxx/ > V1: https://lore.kernel.org/all/20220427090850.32280-1-a-bhatia1@xxxxxx/ > > [0]: https://lore.kernel.org/all/20230616150900.6617-1-a-bhatia1@xxxxxx/ > [1]: https://lore.kernel.org/all/20230619131620.3286650-1-nm@xxxxxx/ > [2]: https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux.git/commit/?id=0bec3d7ecc7493b0e530f6f34539841ef6779006 > [3]: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/log/?h=ti-linux-6.1.y-cicd > > > Aradhya Bhatia (4): > arm64: dts: ti: k3-am62x-sk-common: Update main-i2c1 frequency > arm64: dts: ti: k3-am62-main: Add node for DSS > arm64: dts: ti: k3-am62x-sk-common: Add HDMI support > arm64: defconfig: Enable ITE_IT66121 HDMI transmitter > > Jai Luthra (1): > arm64: dts: ti: am62x-sk: Add overlay for HDMI audio > > Nishanth Menon (1): > arm64: dts: ti: k3-am625-beagleplay: Add HDMI support > > arch/arm64/boot/dts/ti/Makefile | 3 + > arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 25 +++ > arch/arm64/boot/dts/ti/k3-am62.dtsi | 8 + > .../arm64/boot/dts/ti/k3-am625-beagleplay.dts | 150 ++++++++++++++++++ > .../arm64/boot/dts/ti/k3-am62x-sk-common.dtsi | 93 ++++++++++- > .../boot/dts/ti/k3-am62x-sk-hdmi-audio.dtso | 40 +++++ > arch/arm64/configs/defconfig | 1 + > 7 files changed, 319 insertions(+), 1 deletion(-) > create mode 100644 arch/arm64/boot/dts/ti/k3-am62x-sk-hdmi-audio.dtso > > > base-commit: 71cd4fc492ec41e4acd85e98bbf7a13753fc1e03 > -- > 2.40.1 > Can you help cleanup the following before we start introducing new oldi and dss support? I am not sure if these were introduced due to yaml updates or something pre-existing. linux/build/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dtb: dss-oldi-io-ctrl@41e0: compatible: 'anyOf' conditional failed, one must be fixed: linux/build/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic.dtb: dss-oldi-io-ctrl@41e0: compatible: 'anyOf' conditional failed, one must be fixed: linux/build/arch/arm64/boot/dts/ti/k3-am6528-iot2050-basic-pg2.dtb: dss-oldi-io-ctrl@41e0: compatible: 'anyOf' conditional failed, one must be fixed: linux/build/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-pg2.dtb: dss-oldi-io-ctrl@41e0: compatible: 'anyOf' conditional failed, one must be fixed: linux/build/arch/arm64/boot/dts/ti/k3-am654-base-board.dtb: dss-oldi-io-ctrl@41e0: compatible: 'anyOf' conditional failed, one must be fixed: linux/build/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced.dtb: dss-oldi-io-ctrl@41e0: compatible: 'anyOf' conditional failed, one must be fixed: -- Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
