Hi Dylan, > This patch series introduces the necessary changes to enable I3C > support for the Aspeed AST2600 I3C controller. Specifically, it addresses the > missing pinctrl configuration and reset control for the I3C > functionality. +1 for the pinctrl changes for the I3C1 and I3C2 controllers (I'll review and ack separately). I have been testing on I3C3 and up, but just not with the HVI3C on 1 & 2, hence no pinctrl definition there. However, I don't think the other two are needed. For 2/3 and 3/3, you're adding a reset control for the global register block within the per-controller driver, but we can already do that on a global basis with the existing syscon device. Hence this earlier change: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/mfd/syscon.c?id=7d1e3bd94828ad9fc86f55253cd6fec8edd65394 For this, I have: &i3c { i3c_global: i3c-global { compatible = "aspeed,ast2600-i3c-global", "simple-mfd", "syscon"; resets = <&syscon ASPEED_RESET_I3C_DMA>; reg = <0x0 0x1000>; }; i3c2: i3c-master@4000 { compatible = "aspeed,ast2600-i3c"; reg = <0x4000 0x1000>; clocks = <&syscon ASPEED_CLK_GATE_I3C2CLK>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i3c3_default>; interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; aspeed,global-regs = <&i3c_global 2>; status = "disabled"; }; /* ... */ }; - with no changes needed to any bindings. I haven't needed any other resets; are there per-controller resets specified in the HW docs you have? Does that work for you? If you'd like to test, feel free to use my sample dts at: https://github.com/CodeConstruct/linux/commit/05cac24705fa62d2176ecbbbf15d955cfe86e753 Cheers, Jeremy