On Mon, 07 Aug 2023 23:45:25 -0500, Hari Nagalla wrote: > K3 AM64x SoC has a Cortex M4F subsystem in the MCU voltage domain. > The remote processor's life cycle management and IPC mechanisms are > similar across the R5F and M4F cores from remote processor driver > point of view. However, there are subtle differences in image loading > and starting the M4F subsystems. > > The YAML binding document provides the various node properties to be > configured by the consumers of the M4F subsystem. > > Signed-off-by: Martyn Welch <martyn.welch@xxxxxxxxxxxxx> > Signed-off-by: Hari Nagalla <hnagalla@xxxxxx> > --- > Changes since v1: > - Spelling corrections > - Corrected to pass DT checks > > Changes since v2: > - Missed spelling correction to commit message > > Changes since v3: > - Removed unnecessary descriptions and used generic memory region names > - Made mboxes and memory-region optional > - Removed unrelated items from examples > > Changes since v4: > - Rebased to the latest kernel-next tree > - Added optional sram memory region for m4f device node > > .../bindings/remoteproc/ti,k3-m4f-rproc.yaml | 136 ++++++++++++++++++ > 1 file changed, 136 insertions(+) > create mode 100644 Documentation/devicetree/bindings/remoteproc/ti,k3-m4f-rproc.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/dma/stericsson,dma40.example.dtb: dma-controller@801c0000: sram:0: [4294967295, 4294967295] is too long from schema $id: http://devicetree.org/schemas/dma/stericsson,dma40.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230808044529.25925-2-hnagalla@xxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
