Add basic bindings for UBI devices and volumes. Signed-off-by: Daniel Golle <daniel@xxxxxxxxxxxxxx> --- .../bindings/mtd/partitions/linux,ubi.yaml | 65 +++++++++++++++++++ .../bindings/mtd/partitions/ubi-volume.yaml | 35 ++++++++++ 2 files changed, 100 insertions(+) create mode 100644 Documentation/devicetree/bindings/mtd/partitions/linux,ubi.yaml create mode 100644 Documentation/devicetree/bindings/mtd/partitions/ubi-volume.yaml diff --git a/Documentation/devicetree/bindings/mtd/partitions/linux,ubi.yaml b/Documentation/devicetree/bindings/mtd/partitions/linux,ubi.yaml new file mode 100644 index 0000000000000..79cfa0a3eaa7d --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/partitions/linux,ubi.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/partitions/linux,ubi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Unsorted Block Images + +description: | + UBI ("Unsorted Block Images") is a volume management system for raw + flash devices which manages multiple logical volumes on a single + physical flash device and spreads the I/O load (i.e, wear-leveling) + across whole flash chip. + +maintainers: + - Daniel Golle <daniel@xxxxxxxxxxxxxx> + +allOf: + - $ref: partition.yaml# + +properties: + compatible: + const: linux,ubi + + volumes: + type: object + description: UBI Volumes + + patternProperties: + "^ubi-volume-.*$": + $ref: "/schemas/mtd/partitions/ubi-volume.yaml" + + unevaluatedProperties: false + +required: + - compatible + +unevaluatedProperties: false + +examples: + - | + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x0 0x100000>; + label = "bootloader"; + read-only; + }; + + partition@100000 { + reg = <0x100000 0x1ff00000>; + label = "ubi"; + compatible = "linux,ubi"; + + volumes { + ubi-volume-caldata { + volid = <2>; + volname = "rf"; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mtd/partitions/ubi-volume.yaml b/Documentation/devicetree/bindings/mtd/partitions/ubi-volume.yaml new file mode 100644 index 0000000000000..c17d0caf07d97 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/partitions/ubi-volume.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mtd/partitions/ubi-volume.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: UBI volume + +description: | + This binding describes a single UBI volume. Volumes can be matches either + by their ID or their name, or both. + +maintainers: + - Daniel Golle <daniel@xxxxxxxxxxxxxx> + +properties: + volid: + $ref: "/schemas/types.yaml#/definitions/uint32" + description: + Match UBI volume ID + + volname: + $ref: "/schemas/types.yaml#/definitions/string" + description: + Match UBI volume ID + +anyOf: + - required: + - volid + + - required: + - volname + +# This is a generic file other binding inherit from and extend +additionalProperties: true -- 2.41.0
