[PATCH v2 06/13] arm64: dts: ti: k3-j7200: Enable OSPI nodes at the board level

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



OSPI nodes defined in the top-level J7200 SoC dtsi files are incomplete
and may not be functional unless they are extended with pinmux and
device information.

As the attached OSPI device is only known about at the board integration
level, these nodes should only be enabled when provided with this
information.

Disable the OSPI nodes in the dtsi files and only enable the ones that
are actually pinned out on a given board.

Signed-off-by: Andrew Davis <afd@xxxxxx>
Reviewed-by: Dhruva Gole <d-gole@xxxxxx>
---
 arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 1 +
 arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi     | 1 +
 2 files changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index ee7860913c387..571eb0e2eac92 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -544,6 +544,7 @@ ospi0: spi@47040000 {
 			power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			status = "disabled";
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
index b37f4f88ece4f..5a300d4c8ba03 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
@@ -267,6 +267,7 @@ eeprom@50 {
 };
 
 &ospi0 {
+	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
 
-- 
2.39.2




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux