Add linux device tree entry related to Yosemite 4 specific devices connected to BMC SoC. Signed-off-by: Delphine CC Chiu <Delphine_CC_Chiu@xxxxxxxxxx> --- Changelog: v7 - Revise changelog format v6 - Change project name from yosemitev4 to yosemite4 v5 - Revise rtc setting - Remove duplicated multi-master setting v3 - Revise the bootargs to stdout-path - Revise i2c devices v2 - Revise the DTS node name --- arch/arm/boot/dts/aspeed/Makefile | 1 + .../aspeed/aspeed-bmc-facebook-yosemite4.dts | 633 ++++++++++++++++++ 2 files changed, 634 insertions(+) create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile index c68984322a86..5b9264b823f3 100644 --- a/arch/arm/boot/dts/aspeed/Makefile +++ b/arch/arm/boot/dts/aspeed/Makefile @@ -26,6 +26,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-bmc-facebook-wedge400.dtb \ aspeed-bmc-facebook-yamp.dtb \ aspeed-bmc-facebook-yosemitev2.dtb \ + aspeed-bmc-facebook-yosemite4.dtb \ aspeed-bmc-ibm-bonnell.dtb \ aspeed-bmc-ibm-everest.dtb \ aspeed-bmc-ibm-rainier.dtb \ diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts new file mode 100644 index 000000000000..0791dea588b2 --- /dev/null +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts @@ -0,0 +1,633 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +// Copyright 2022 Facebook Inc. + +/dts-v1/; +#include "aspeed-g6.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> +#include <dt-bindings/leds/leds-pca955x.h> +#include <dt-bindings/i2c/i2c.h> + +/ { + model = "Facebook Yosemite 4 BMC"; + compatible = "facebook,yosemite4-bmc", "aspeed,ast2600"; + + aliases { + serial4 = &uart5; + serial5 = &uart6; + serial6 = &uart7; + serial7 = &uart8; + serial8 = &uart9; + }; + + chosen { + stdout-path = "serial4:57600n8"; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>, + <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>, + <&adc1 0>, <&adc1 1>; + }; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&uart6 { + status = "okay"; +}; + +&uart7 { + status = "okay"; +}; + +&uart8 { + status = "okay"; +}; + +&uart9 { + status = "okay"; +}; + +&wdt1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdtrst1_default>; + aspeed,reset-type = "soc"; + aspeed,external-signal; + aspeed,ext-push-pull; + aspeed,ext-active-high; + aspeed,ext-pulse-duration = <256>; +}; + +&mac2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii3_default>; + no-hw-checksum; + use-ncsi; + mlx,multi-host; + ncsi-ctrl,start-redo-probe; + ncsi-ctrl,no-channel-monitor; + ncsi-package = <1>; + ncsi-channel = <1>; + ncsi-rexmit = <1>; + ncsi-timeout = <2>; +}; + +&mac3 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii4_default>; + no-hw-checksum; + use-ncsi; + mlx,multi-host; + ncsi-ctrl,start-redo-probe; + ncsi-ctrl,no-channel-monitor; + ncsi-package = <1>; + ncsi-channel = <1>; + ncsi-rexmit = <1>; + ncsi-timeout = <2>; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; + spi-rx-bus-width = <4>; + spi-max-frequency = <50000000>; +#include "openbmc-flash-layout-64.dtsi" + }; + flash@1 { + status = "okay"; + m25p,fast-read; + label = "bmc2"; + spi-rx-bus-width = <4>; + spi-max-frequency = <50000000>; + }; +}; + +&i2c0 { + status = "okay"; + mctp-controller; + bus-frequency = <400000>; + multi-master; + + mctp@10 { + compatible = "mctp-i2c-controller"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + }; + + power-sensor@40 { + compatible = "adi,adm1278"; + reg = <0x40>; + }; +}; + +&i2c1 { + status = "okay"; + mctp-controller; + bus-frequency = <400000>; + multi-master; + + mctp@10 { + compatible = "mctp-i2c-controller"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + }; + + power-sensor@40 { + compatible = "adi,adm1278"; + reg = <0x40>; + }; +}; + +&i2c2 { + status = "okay"; + mctp-controller; + bus-frequency = <400000>; + multi-master; + + mctp@10 { + compatible = "mctp-i2c-controller"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + }; + + power-sensor@40 { + compatible = "adi,adm1278"; + reg = <0x40>; + }; +}; + +&i2c3 { + status = "okay"; + mctp-controller; + bus-frequency = <400000>; + multi-master; + + mctp@10 { + compatible = "mctp-i2c-controller"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + }; + + power-sensor@40 { + compatible = "adi,adm1278"; + reg = <0x40>; + }; +}; + +&i2c4 { + status = "okay"; + mctp-controller; + bus-frequency = <400000>; + multi-master; + + mctp@10 { + compatible = "mctp-i2c-controller"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + }; + + power-sensor@40 { + compatible = "adi,adm1278"; + reg = <0x40>; + }; +}; + +&i2c5 { + status = "okay"; + mctp-controller; + bus-frequency = <400000>; + multi-master; + + mctp@10 { + compatible = "mctp-i2c-controller"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + }; + + power-sensor@40 { + compatible = "adi,adm1278"; + reg = <0x40>; + }; +}; + +&i2c6 { + status = "okay"; + mctp-controller; + bus-frequency = <400000>; + multi-master; + + mctp@10 { + compatible = "mctp-i2c-controller"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + }; + + power-sensor@40 { + compatible = "adi,adm1278"; + reg = <0x40>; + }; +}; + +&i2c7 { + status = "okay"; + mctp-controller; + bus-frequency = <400000>; + multi-master; + + mctp@10 { + compatible = "mctp-i2c-controller"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + }; + + power-sensor@40 { + compatible = "adi,adm1278"; + reg = <0x40>; + }; +}; + +&i2c8 { + status = "okay"; + bus-frequency = <400000>; + i2c-mux@70 { + compatible = "nxp,pca9544"; + idle-state = <0>; + i2c-mux-idle-disconnect; + reg = <0x70>; + }; +}; + +&i2c9 { + status = "okay"; + bus-frequency = <400000>; + i2c-mux@71 { + compatible = "nxp,pca9544"; + idle-state = <0>; + i2c-mux-idle-disconnect; + reg = <0x71>; + }; +}; + +&i2c10 { + status = "okay"; + bus-frequency = <400000>; +}; + +&i2c11 { + status = "okay"; + bus-frequency = <400000>; + power-sensor@10 { + compatible = "adi, adm1272"; + reg = <0x10>; + }; + + power-sensor@12 { + compatible = "adi, adm1272"; + reg = <0x12>; + }; + + gpio@20 { + compatible = "nxp,pca9555"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@21 { + compatible = "nxp,pca9555"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@22 { + compatible = "nxp,pca9555"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + }; + + gpio@23 { + compatible = "nxp,pca9555"; + reg = <0x23>; + gpio-controller; + #gpio-cells = <2>; + }; + + temperature-sensor@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; + + temperature-sensor@49 { + compatible = "ti,tmp75"; + reg = <0x49>; + }; + + temperature-sensor@4a { + compatible = "ti,tmp75"; + reg = <0x4a>; + }; + + temperature-sensor@4b { + compatible = "ti,tmp75"; + reg = <0x4b>; + }; + + eeprom@54 { + compatible = "atmel,24c256"; + reg = <0x54>; + }; +}; + +&i2c12 { + status = "okay"; + bus-frequency = <400000>; + + temperature-sensor@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; + + eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + }; + + rtc@6f { + compatible = "nuvoton,nct3018y"; + reg = <0x6f>; + }; +}; + +&i2c13 { + status = "okay"; + bus-frequency = <400000>; +}; + +&i2c14 { + status = "okay"; + bus-frequency = <400000>; + adc@1d { + compatible = "ti,adc128d818"; + reg = <0x1d>; + ti,mode = /bits/ 8 <2>; + }; + + adc@35 { + compatible = "ti,adc128d818"; + reg = <0x35>; + ti,mode = /bits/ 8 <2>; + }; + + adc@37 { + compatible = "ti,adc128d818"; + reg = <0x37>; + ti,mode = /bits/ 8 <2>; + }; + + power-sensor@40 { + compatible = "ti,ina230"; + reg = <0x40>; + }; + + power-sensor@41 { + compatible = "ti,ina230"; + reg = <0x41>; + }; + + power-sensor@42 { + compatible = "ti,ina230"; + reg = <0x42>; + }; + + power-sensor@41 { + compatible = "ti,ina230"; + reg = <0x43>; + }; + + power-sensor@44 { + compatible = "ti,ina230"; + reg = <0x44>; + }; + + temperature-sensor@4e { + compatible = "ti,tmp75"; + reg = <0x4e>; + }; + + temperature-sensor@4f { + compatible = "ti,tmp75"; + reg = <0x4f>; + }; + + eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + }; + + i2c-mux@71 { + compatible = "nxp,pca9846"; + idle-state = <0>; + i2c-mux-idle-disconnect; + reg = <0x71>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + adc@1f { + compatible = "ti,adc128d818"; + reg = <0x1f>; + ti,mode = /bits/ 8 <2>; + }; + + pwm@20{ + compatible = "max31790"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + }; + + gpio@22{ + compatible = "ti,tca6424"; + reg = <0x22>; + }; + + pwm@23{ + compatible = "max31790"; + reg = <0x23>; + #address-cells = <1>; + #size-cells = <0>; + }; + + adc@33 { + compatible = "maxim,max11615"; + reg = <0x33>; + }; + + eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + }; + + gpio@61 { + compatible = "nxp,pca9552"; + reg = <0x61>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + adc@1f { + compatible = "ti,adc128d818"; + reg = <0x1f>; + ti,mode = /bits/ 8 <2>; + }; + + pwm@20{ + compatible = "max31790"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + }; + + gpio@22{ + compatible = "ti,tca6424"; + reg = <0x22>; + }; + + pwm@23{ + compatible = "max31790"; + reg = <0x23>; + #address-cells = <1>; + #size-cells = <0>; + }; + + adc@33 { + compatible = "maxim,max11615"; + reg = <0x33>; + }; + + eeprom@52 { + compatible = "atmel,24c128"; + reg = <0x52>; + }; + + gpio@61 { + compatible = "nxp,pca9552"; + reg = <0x61>; + #address-cells = <1>; + #size-cells = <0>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + }; + + i2c-mux@73 { + compatible = "nxp,pca9544"; + idle-state = <0>; + i2c-mux-idle-disconnect; + reg = <0x73>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + adc@35 { + compatible = "maxim,max11617"; + reg = <0x35>; + }; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + adc@35 { + compatible = "maxim,max11617"; + reg = <0x35>; + }; + }; + }; +}; + +&i2c15 { + status = "okay"; + mctp-controller; + multi-master; + bus-frequency = <400000>; + + mctp@10 { + compatible = "mctp-i2c-controller"; + reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>; + }; + + i2c-mux@72 { + compatible = "nxp,pca9544"; + idle-state = <0>; + i2c-mux-idle-disconnect; + reg = <0x72>; + }; +}; + +&adc0 { + ref_voltage = <2500>; + status = "okay"; + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default + &pinctrl_adc2_default &pinctrl_adc3_default + &pinctrl_adc4_default &pinctrl_adc5_default + &pinctrl_adc6_default &pinctrl_adc7_default>; +}; + +&adc1 { + ref_voltage = <2500>; + status = "okay"; + pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default>; +}; + + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&uhci { + status = "okay"; +}; -- 2.25.1