Re: [PATCH v2 14/28] soc: fsl: cpm1: qmc: Split Tx and Rx TSA entries setup

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Le 26/07/2023 à 17:02, Herve Codina a écrit :
> The Tx and Rx entries for a given channel are set in one function.
> 
> In order to modify Rx entries and Tx entries independently of one other,
> split this function in one for the Rx part and one for the Tx part.
> 
> Signed-off-by: Herve Codina <herve.codina@xxxxxxxxxxx>

Reviewed-by: Christophe Leroy <christophe.leroy@xxxxxxxxxx>

> ---
>   drivers/soc/fsl/qe/qmc.c | 49 ++++++++++++++++++++++++++++------------
>   1 file changed, 35 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/soc/fsl/qe/qmc.c b/drivers/soc/fsl/qe/qmc.c
> index 146eebc12737..c8ddd2a54bee 100644
> --- a/drivers/soc/fsl/qe/qmc.c
> +++ b/drivers/soc/fsl/qe/qmc.c
> @@ -610,14 +610,14 @@ static int qmc_chan_setup_tsa_64rxtx(struct qmc_chan *chan, const struct tsa_ser
>   	return 0;
>   }
>   
> -static int qmc_chan_setup_tsa_32rx_32tx(struct qmc_chan *chan, const struct tsa_serial_info *info,
> -					bool enable)
> +static int qmc_chan_setup_tsa_32rx(struct qmc_chan *chan, const struct tsa_serial_info *info,
> +				   bool enable)
>   {
>   	unsigned int i;
>   	u16 curr;
>   	u16 val;
>   
> -	/* Use a Tx 32 entries table and a Rx 32 entries table */
> +	/* Use a Rx 32 entries table */
>   
>   	val = QMC_TSA_VALID | QMC_TSA_MASK | QMC_TSA_CHANNEL(chan->id);
>   
> @@ -633,6 +633,30 @@ static int qmc_chan_setup_tsa_32rx_32tx(struct qmc_chan *chan, const struct tsa_
>   			return -EBUSY;
>   		}
>   	}
> +
> +	/* Set entries based on Rx stuff */
> +	for (i = 0; i < info->nb_rx_ts; i++) {
> +		if (!(chan->rx_ts_mask & (((u64)1) << i)))
> +			continue;
> +
> +		qmc_clrsetbits16(chan->qmc->scc_pram + QMC_GBL_TSATRX + (i * 2),
> +				 ~QMC_TSA_WRAP, enable ? val : 0x0000);
> +	}
> +
> +	return 0;
> +}
> +
> +static int qmc_chan_setup_tsa_32tx(struct qmc_chan *chan, const struct tsa_serial_info *info,
> +				   bool enable)
> +{
> +	unsigned int i;
> +	u16 curr;
> +	u16 val;
> +
> +	/* Use a Tx 32 entries table */
> +
> +	val = QMC_TSA_VALID | QMC_TSA_MASK | QMC_TSA_CHANNEL(chan->id);
> +
>   	/* Check entries based on Tx stuff */
>   	for (i = 0; i < info->nb_tx_ts; i++) {
>   		if (!(chan->tx_ts_mask & (((u64)1) << i)))
> @@ -646,14 +670,6 @@ static int qmc_chan_setup_tsa_32rx_32tx(struct qmc_chan *chan, const struct tsa_
>   		}
>   	}
>   
> -	/* Set entries based on Rx stuff */
> -	for (i = 0; i < info->nb_rx_ts; i++) {
> -		if (!(chan->rx_ts_mask & (((u64)1) << i)))
> -			continue;
> -
> -		qmc_clrsetbits16(chan->qmc->scc_pram + QMC_GBL_TSATRX + (i * 2),
> -				 ~QMC_TSA_WRAP, enable ? val : 0x0000);
> -	}
>   	/* Set entries based on Tx stuff */
>   	for (i = 0; i < info->nb_tx_ts; i++) {
>   		if (!(chan->tx_ts_mask & (((u64)1) << i)))
> @@ -680,9 +696,14 @@ static int qmc_chan_setup_tsa(struct qmc_chan *chan, bool enable)
>   	 * Setup one common 64 entries table or two 32 entries (one for Tx
>   	 * and one for Tx) according to assigned TS numbers.
>   	 */
> -	return ((info.nb_tx_ts > 32) || (info.nb_rx_ts > 32)) ?
> -		qmc_chan_setup_tsa_64rxtx(chan, &info, enable) :
> -		qmc_chan_setup_tsa_32rx_32tx(chan, &info, enable);
> +	if (info.nb_tx_ts > 32 || info.nb_rx_ts > 32)
> +		return qmc_chan_setup_tsa_64rxtx(chan, &info, enable);
> +
> +	ret = qmc_chan_setup_tsa_32rx(chan, &info, enable);
> +	if (ret)
> +		return ret;
> +
> +	return qmc_chan_setup_tsa_32tx(chan, &info, enable);
>   }
>   
>   static int qmc_chan_command(struct qmc_chan *chan, u8 qmc_opcode)




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux