Some branch clocks are governed externally and we're only supposed to
send a request concerning their shutdown, not actually ensure it happens.
Use the BRANCH_HALT_SKIP define to skip checking the halt bit.
Fixes: db2c7c0a04b1 ("clk: qcom: Add missing msm8998 gcc_bimc_gfx_clk")
Fixes: b5f5f525c547 ("clk: qcom: Add MSM8998 Global Clock Control (GCC) driver")
Reviewed-by: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
---
drivers/clk/qcom/gcc-msm8998.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/clk/qcom/gcc-msm8998.c b/drivers/clk/qcom/gcc-msm8998.c
index 1ba516a0c0f3..257b27d8eeb6 100644
--- a/drivers/clk/qcom/gcc-msm8998.c
+++ b/drivers/clk/qcom/gcc-msm8998.c
@@ -2060,7 +2060,7 @@ static struct clk_branch gcc_gp3_clk = {
static struct clk_branch gcc_bimc_gfx_clk = {
.halt_reg = 0x46040,
- .halt_check = BRANCH_HALT,
+ .halt_check = BRANCH_HALT_SKIP,
.clkr = {
.enable_reg = 0x46040,
.enable_mask = BIT(0),
@@ -2073,7 +2073,7 @@ static struct clk_branch gcc_bimc_gfx_clk = {
static struct clk_branch gcc_gpu_bimc_gfx_clk = {
.halt_reg = 0x71010,
- .halt_check = BRANCH_HALT,
+ .halt_check = BRANCH_HALT_SKIP,
.clkr = {
.enable_reg = 0x71010,
.enable_mask = BIT(0),
@@ -2099,7 +2099,7 @@ static struct clk_branch gcc_gpu_bimc_gfx_src_clk = {
static struct clk_branch gcc_gpu_cfg_ahb_clk = {
.halt_reg = 0x71004,
- .halt_check = BRANCH_HALT,
+ .halt_check = BRANCH_HALT_SKIP,
.clkr = {
.enable_reg = 0x71004,
.enable_mask = BIT(0),
--
2.41.0
