Re: [PATCH v18 08/20] PCI: dwc: Add dw_pcie_link_set_max_link_width()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Bjorn,

Your attention is required in this thread. Could you please give us
your resolution regarding the issue denoted in my last comment?

-Serge(y)

On Tue, Aug 01, 2023 at 01:50:59AM +0000, Yoshihiro Shimoda wrote:
> Hi Serge,
> 
> > From: Serge Semin, Sent: Tuesday, August 1, 2023 8:54 AM
> > 
> > On Fri, Jul 21, 2023 at 04:44:40PM +0900, Yoshihiro Shimoda wrote:
> > > To improve code readability, add dw_pcie_link_set_max_link_width().
> > 
> > You completely ignored all my comments regarding this patch again.
> > It's getting to be annoying really.
> 
> I'm sorry for that. I completely forgot to add description even though
> I said so on the v17 [1].
> 
> [1] https://lore.kernel.org/linux-pci/TYBPR01MB5341BE7E22A0721672A0FFAFD834A@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/
> 
> > Once again: "This patch is a preparation before adding the
> > Max-Link-width capability setup which would in its turn complete the
> > max-link-width setup procedure defined by Synopsys in the HW-manual.
> > Seeing there is a max-link-speed setup method defined in the DW PCIe
> > core driver it would be good to have a similar function for the link
> > width setup. That's why we need to define a dedicated function first
> > from already implemented but incomplete link-width setting up
> > code." This is what should have been described in the commit log.
> > If you were a side-reader of the patch could you guess that from your
> > commit log and the patch content? I bet you couldn't. That's why a
> > very thorough description is important.
> 
> Thank you for your suggestion. I have never read the description before.
> About the [1] above, you said just "This patch is a preparation".
> So, perhaps, some trouble happened when I sent an email?
> Anyway, I will replace the commit description to your suggestion and
> add your Suggested-by tag.
> 
> > >
> > > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx>
> > > Reviewed-by: Manivannan Sadhasivam <mani@xxxxxxxxxx>
> > > ---
> > >  drivers/pci/controller/dwc/pcie-designware.c | 86 ++++++++++----------
> > >  1 file changed, 41 insertions(+), 45 deletions(-)
> > >
> > > diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
> > > index 2d0f816fa0ab..5cca34140d2a 100644
> > > --- a/drivers/pci/controller/dwc/pcie-designware.c
> > > +++ b/drivers/pci/controller/dwc/pcie-designware.c
> > > @@ -728,6 +728,46 @@ static void dw_pcie_link_set_max_speed(struct dw_pcie *pci, u32 link_gen)
> > >
> > >  }
> > >
> > > +static void dw_pcie_link_set_max_link_width(struct dw_pcie *pci, u32 num_lanes)
> > > +{
> > > +	u32 lwsc, plc;
> > > +
> > > +	if (!num_lanes)
> > > +		return;
> > > +
> > > +	/* Set the number of lanes */
> > > +	plc = dw_pcie_readl_dbi(pci, PCIE_PORT_LINK_CONTROL);
> > 
> > > +	plc &= ~PORT_LINK_FAST_LINK_MODE;
> > 
> > Once again: this masking is unrelated to the link width setup.
> > Moreover it's completely redundant in here and in the original code.
> > See further for details.
> 
> I got it.
> 
> > > +	plc &= ~PORT_LINK_MODE_MASK;
> > > +
> > > +	/* Set link width speed control register */
> > > +	lwsc = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL);
> > > +	lwsc &= ~PORT_LOGIC_LINK_WIDTH_MASK;
> > > +	switch (num_lanes) {
> > > +	case 1:
> > > +		plc |= PORT_LINK_MODE_1_LANES;
> > > +		lwsc |= PORT_LOGIC_LINK_WIDTH_1_LANES;
> > > +		break;
> > > +	case 2:
> > > +		plc |= PORT_LINK_MODE_2_LANES;
> > > +		lwsc |= PORT_LOGIC_LINK_WIDTH_2_LANES;
> > > +		break;
> > > +	case 4:
> > > +		plc |= PORT_LINK_MODE_4_LANES;
> > > +		lwsc |= PORT_LOGIC_LINK_WIDTH_4_LANES;
> > > +		break;
> > > +	case 8:
> > > +		plc |= PORT_LINK_MODE_8_LANES;
> > > +		lwsc |= PORT_LOGIC_LINK_WIDTH_8_LANES;
> > > +		break;
> > > +	default:
> > > +		dev_err(pci->dev, "num-lanes %u: invalid value\n", num_lanes);
> > > +		return;
> > > +	}
> > > +	dw_pcie_writel_dbi(pci, PCIE_PORT_LINK_CONTROL, plc);
> > > +	dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, lwsc);
> > > +}
> > > +
> > >  void dw_pcie_iatu_detect(struct dw_pcie *pci)
> > >  {
> > >  	int max_region, ob, ib;
> > > @@ -1009,49 +1049,5 @@ void dw_pcie_setup(struct dw_pcie *pci)
> > >  	val |= PORT_LINK_DLL_LINK_EN;
> > >  	dw_pcie_writel_dbi(pci, PCIE_PORT_LINK_CONTROL, val);
> > >
> > > -	if (!pci->num_lanes) {
> > > -		dev_dbg(pci->dev, "Using h/w default number of lanes\n");
> > > -		return;
> > > -	}
> > > -
> > > -	/* Set the number of lanes */
> > 
> > > -	val &= ~PORT_LINK_FAST_LINK_MODE;
> > 
> > My series contains the patch which drops this line:
> <snip URL>
> > So either pick my patch up and add it to your series or still pick it up
> > but with changing the authorship and adding me under the Suggested-by
> > tag with the email-address I am using to review your series. Bjorn,
> > what approach would you prefer? Perhaps alternative?
> 
> I'll wait for Bjorn's opinion.
> 
> Best regards,
> Yoshihiro Shimoda
> 
> > Note the patch I am talking about doesn't contain anything what
> > couldn't be merged in. The problem with my series is in completely
> > another dimension.
> > 
> > Bjorn
> > 
> > > -	val &= ~PORT_LINK_MODE_MASK;
> > > -	switch (pci->num_lanes) {
> > > -	case 1:
> > > -		val |= PORT_LINK_MODE_1_LANES;
> > > -		break;
> > > -	case 2:
> > > -		val |= PORT_LINK_MODE_2_LANES;
> > > -		break;
> > > -	case 4:
> > > -		val |= PORT_LINK_MODE_4_LANES;
> > > -		break;
> > > -	case 8:
> > > -		val |= PORT_LINK_MODE_8_LANES;
> > > -		break;
> > > -	default:
> > > -		dev_err(pci->dev, "num-lanes %u: invalid value\n", pci->num_lanes);
> > > -		return;
> > > -	}
> > > -	dw_pcie_writel_dbi(pci, PCIE_PORT_LINK_CONTROL, val);
> > > -
> > > -	/* Set link width speed control register */
> > > -	val = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL);
> > > -	val &= ~PORT_LOGIC_LINK_WIDTH_MASK;
> > > -	switch (pci->num_lanes) {
> > > -	case 1:
> > > -		val |= PORT_LOGIC_LINK_WIDTH_1_LANES;
> > > -		break;
> > > -	case 2:
> > > -		val |= PORT_LOGIC_LINK_WIDTH_2_LANES;
> > > -		break;
> > > -	case 4:
> > > -		val |= PORT_LOGIC_LINK_WIDTH_4_LANES;
> > > -		break;
> > > -	case 8:
> > > -		val |= PORT_LOGIC_LINK_WIDTH_8_LANES;
> > > -		break;
> > > -	}
> > > -	dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, val);
> > > +	dw_pcie_link_set_max_link_width(pci, pci->num_lanes);
> > >  }
> > > --
> > > 2.25.1
> > >



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux