[PATCH 7/9] arm64: dts: qcom: sa8775p-ride: add the second SGMII PHY

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>

Add a second SGMII PHY that will be used by EMAC1 on sa8775p-ride.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sa8775p-ride.dts | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
index 55feaac7fa1b..5b48066f312a 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
+++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
@@ -286,6 +286,14 @@ sgmii_phy0: phy@8 {
 			reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>;
 			reset-deassert-us = <70000>;
 		};
+
+		sgmii_phy1: phy@a {
+			compatible = "ethernet-phy-id0141.0dd4";
+			reg = <0xa>;
+			device_type = "ethernet-phy";
+			reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>;
+			reset-deassert-us = <70000>;
+		};
 	};
 
 	mtl_rx_setup: rx-queues-config {
-- 
2.39.2




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux