Re: [PATCH v2] arm64: dts: ti: k3-j784s4-evm: Correct Pin mux offset for ospi

["Kumar, Udit" <u-kumar1@xxxxxx>]

Thanks Vaishnav.

Hi Nishanth,

On 8/7/2023 8:09 PM, Vaishnav Achath wrote:
> Hi Udit,
>
> On 02/08/23 17:11, Udit Kumar wrote:
> > [...]
> > Thank you for the patch,
> >
> > For OSPI functionality:
> >
> > Tested-by: Vaishnav Achath <vaishnav.a@xxxxxx>
> >
> > before: https://gist.github.com/vaishnavachath/c87275e53f6ae38bacc44c65ed09c733
> > (QSPI probe fails due to wrong pinmux)
> > after: https://gist.github.com/vaishnavachath/b5f6147cfae5218815aca94ec0dfd991
> > (both QSPI, OSPI is functional)
> >
> > heads-up :
> > I see the following warnings for ADC:
> >
> > ```
> >   pinctrl-single 4301c068.pinctrl: mux offset out of range: 0x134 (0x120)
> >   pinctrl-single 4301c068.pinctrl: could not add functions for
> > mcu-adc0-default-pins 308x
> > pinctrl-single 4301c068.pinctrl: mux offset out of range: 0x154 (0x120)
> > pinctrl-single 4301c068.pinctrl: could not add functions for
> > mcu-adc1-default-pins 340x
> > ```
> >
> > mcu_adc0_pins_default and mcu_adc1_pins_default entries needs to have the
> > wkup_pmx2 base (0x68) subtracted to get the appropriate offsets, not sure if
> > there is already a patch addressing the same or should be part of this patch.

let me know, if you are ok with other patch to address adc pin mux or I 
should respin with adc changes


> > Thanks and Regards,
> > Vaishnav
> >
> >   		>;
> >   	};
> >   };
> > @@ -437,7 +444,7 @@ &fss {
> >   &ospi0 {
> >   	status = "okay";
> >   	pinctrl-names = "default";
> > -	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
> > +	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>, <&mcu_fss0_ospi0_1_pins_default>;
> >   
> >   	flash@0 {
> >   		compatible = "jedec,spi-nor";