Hello, This series adds a vendor prefix for BigTreeTech and adds BigTreeTech CB1, Manta board and BigTreeTech Pi. CB1 is just an SoM thats based on AllWinner H616. BigTreeTech Manta boards are expander boards for CB1 and BigTreeTech Pi is an CB1 in Rpi style with few additional things like IR receiver and fan port on GPIO. This work started before I was hired by BigTreeTech and thus majority of the patches are from SoMainline email and few are from my work email. This series depends on commit https://lkml.org/lkml/2023/8/2/801 "dt-bindings: mfd: x-powers,axp152: make interrupt optional for more chips". Cheers, Martin Martin Botka (4): dt-bindings: vendor-prefixes: Add BigTreeTech dt-bindings: arm: sunxi: Add BigTreeTech boards arm64: dts: allwinner: h616: Add BigTreeTech CB1 SoM & boards support arm64: dts: allwinner: h616: Add BigTreeTech Pi support .../devicetree/bindings/arm/sunxi.yaml | 11 ++ .../devicetree/bindings/vendor-prefixes.yaml | 2 + arch/arm64/boot/dts/allwinner/Makefile | 2 + .../sun50i-h616-bigtreetech-cb1-manta.dts | 35 +++++ .../sun50i-h616-bigtreetech-cb1.dtsi | 140 ++++++++++++++++++ .../allwinner/sun50i-h616-bigtreetech-pi.dts | 70 +++++++++ 6 files changed, 260 insertions(+) create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1-manta.dts create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-cb1.dtsi create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h616-bigtreetech-pi.dts -- 2.41.0
