On 03/08/2023 00:02, Martin Botka wrote: > From: Martin Botka <martin.botka@xxxxxxxxxxxxxx> > > CB1 is Compute Module style board that plugs into Rpi board style adapter or > Manta 3D printer boards (M4P/M8P). > > The SoM features: > - H616 SoC > - 1GiB of RAM > - AXP313A PMIC > - RTL8189FTV WiFi ... > +&mmc0 { > + vmmc-supply = <®_dldo1>; > + broken-cd; > + bus-width = <4>; > + status = "okay"; > +}; > + > +&mmc1 { > + vmmc-supply = <®_vcc33_wifi>; > + vqmmc-supply = <®_vcc_wifi_io>; > + mmc-pwrseq = <&wifi_pwrseq>; > + bus-width = <4>; > + non-removable; > + mmc-ddr-1_8v; > + status = "okay"; > + > + rtl8189ftv: sdio_wifi@1 { No underxcores in node names. Generic node names, so probably "wifi". > + reg = <1>; Missing compatible? Best regards, Krzysztof