Re: [PATCH 08/17] MIPS: loongson32: Convert Ethernet platform device to DT

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Aug 2, 2023 at 6:31 PM Du Huanpeng <dhu@xxxxxxxxxxxxxx> wrote:
>
> On Wed, Aug 02, 2023 at 11:10:10AM +0800, Keguang Zhang wrote:
> > On Wed, Aug 2, 2023 at 2:21 AM Serge Semin <fancer.lancer@xxxxxxxxx> wrote:
> > >
> > > On Sat, Jul 29, 2023 at 09:43:09PM +0800, Keguang Zhang wrote:
> > > > Add Ethernet device nodes for Loongson-1 boards,
> > > > and drop the legacy platform devices and data accordingly.
> > >
> > > It seems to me that your conversion breaks the RGMII mode support.
> > > What you need to do is to make sure that the respective flags are set
> > > in the MUX space.
> > >
> > > Regarding the MUX-space. It looks as a pinctrl-setting space. If so
> > > adding the new pinctrl driver will be required. Otherwise it can be
> > > defined as a syscon-node and then utilized in the Loongson-1 GMAC
> > > low-level driver.
> > >
> > Thanks for your reminder.
> > I planned to add the pinctrl driver later.
> > Now I'm working on it.
> hi, I wrote a tool(work-in-progress) for generating pinctrl driver,
> do you want to try, and avoid duplicate work.

A tool for generating pinctrl driver?
Could you share it?
Perhaps you could submit your driver when it is done.
Thanks!

> and could you merge my ls1c300 devicetree for u-boot, because
> u-boot wants to keep the devicetree sync with the linux kernel.
> some nodes needed and working are not exist in your devicetree.
>
> [1] https://github.com/hodcarrier/u-boot/blob/upstream/loongson-ls1c300b/v4/arch/mips/dts/loongson32-ls1c300b.dtsi
>
I 've noticed your eariier commit for U-Boot.
We can discuss it in more detail.
> ---
> Du Huanpeng
> >
> > > -Serge(y)
> > >
> > > >
> > > > Signed-off-by: Keguang Zhang <keguang.zhang@xxxxxxxxx>
> > > > ---
> > > >  arch/mips/boot/dts/loongson/loongson1.dtsi    |  16 ++
> > > >  arch/mips/boot/dts/loongson/loongson1b.dtsi   |  53 +++++++
> > > >  arch/mips/boot/dts/loongson/loongson1c.dtsi   |  17 ++
> > > >  arch/mips/boot/dts/loongson/lsgz_1b_dev.dts   |   8 +
> > > >  arch/mips/boot/dts/loongson/smartloong_1c.dts |   4 +
> > > >  arch/mips/loongson32/common/platform.c        | 146 +-----------------
> > > >  arch/mips/loongson32/ls1b/board.c             |   2 -
> > > >  arch/mips/loongson32/ls1c/board.c             |   1 -
> > > >  8 files changed, 99 insertions(+), 148 deletions(-)
> > > >
> > > > diff --git a/arch/mips/boot/dts/loongson/loongson1.dtsi b/arch/mips/boot/dts/loongson/loongson1.dtsi
> > > > index c77aa2d0f66c..48bb786bbf10 100644
> > > > --- a/arch/mips/boot/dts/loongson/loongson1.dtsi
> > > > +++ b/arch/mips/boot/dts/loongson/loongson1.dtsi
> > > > @@ -71,6 +71,22 @@ intc3: interrupt-controller@1fd01088 {
> > > >                       interrupt-parent = <&cpu_intc>;
> > > >                       interrupts = <5>;
> > > >               };
> > > > +
> > > > +             gmac0: ethernet@1fe10000 {
> > > > +                     compatible = "snps,dwmac-3.70a";
> > > > +                     reg = <0x1fe10000 0x10000>;
> > > > +
> > > > +                     interrupt-parent = <&intc1>;
> > > > +                     interrupt-names = "macirq";
> > > > +
> > > > +                     clocks = <&clkc LS1X_CLKID_AHB>;
> > > > +                     clock-names = "stmmaceth";
> > > > +
> > > > +                     snps,pbl = <1>;
> > > > +
> > > > +                     status = "disabled";
> > > > +             };
> > > > +
> > > >       };
> > > >
> > > >       apb: bus@1fe40000 {
> > > > diff --git a/arch/mips/boot/dts/loongson/loongson1b.dtsi b/arch/mips/boot/dts/loongson/loongson1b.dtsi
> > > > index 437a77cee163..42b96c557660 100644
> > > > --- a/arch/mips/boot/dts/loongson/loongson1b.dtsi
> > > > +++ b/arch/mips/boot/dts/loongson/loongson1b.dtsi
> > > > @@ -7,6 +7,11 @@
> > > >  #include "loongson1.dtsi"
> > > >
> > > >  / {
> > > > +     aliases {
> > > > +             ethernet0 = &gmac0;
> > > > +             ethernet1 = &gmac1;
> > > > +     };
> > > > +
> > > >       cpus {
> > > >               #address-cells = <1>;
> > > >               #size-cells = <0>;
> > > > @@ -74,6 +79,54 @@ clkc: clock-controller@1fe78030 {
> > > >       };
> > > >  };
> > > >
> > > > +&ahb {
> > > > +     gmac1: ethernet@1fe20000 {
> > > > +             compatible = "snps,dwmac-3.70a";
> > > > +             reg = <0x1fe20000 0x10000>;
> > > > +
> > > > +             interrupt-parent = <&intc1>;
> > > > +             interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
> > > > +             interrupt-names = "macirq";
> > > > +
> > > > +             clocks = <&clkc LS1X_CLKID_AHB>;
> > > > +             clock-names = "stmmaceth";
> > > > +
> > > > +             phy-handle = <&phy1>;
> > > > +             phy-mode = "mii";
> > > > +
> > > > +             snps,pbl = <1>;
> > > > +
> > > > +             status = "disabled";
> > > > +
> > > > +             mdio1 {
> > > > +                     #address-cells = <1>;
> > > > +                     #size-cells = <0>;
> > > > +                     compatible = "snps,dwmac-mdio";
> > > > +
> > > > +                     phy1: ethernet-phy@0 {
> > > > +                             reg = <0x0>;
> > > > +                     };
> > > > +             };
> > > > +     };
> > > > +};
> > > > +
> > > > +&gmac0 {
> > > > +     interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
> > > > +
> > > > +     phy-handle = <&phy0>;
> > > > +     phy-mode = "mii";
> > > > +
> > > > +     mdio0 {
> > > > +             #address-cells = <1>;
> > > > +             #size-cells = <0>;
> > > > +             compatible = "snps,dwmac-mdio";
> > > > +
> > > > +             phy0: ethernet-phy@0 {
> > > > +                     reg = <0x0>;
> > > > +             };
> > > > +     };
> > > > +};
> > > > +
> > > >  &uart1 {
> > > >       interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
> > > >  };
> > > > diff --git a/arch/mips/boot/dts/loongson/loongson1c.dtsi b/arch/mips/boot/dts/loongson/loongson1c.dtsi
> > > > index 1dd575b7b2f9..5b3e0f9280f6 100644
> > > > --- a/arch/mips/boot/dts/loongson/loongson1c.dtsi
> > > > +++ b/arch/mips/boot/dts/loongson/loongson1c.dtsi
> > > > @@ -41,6 +41,23 @@ intc4: interrupt-controller@1fd010a0 {
> > > >       };
> > > >  };
> > > >
> > > > +&gmac0 {
> > > > +     interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
> > > > +
> > > > +     phy-handle = <&phy0>;
> > > > +     phy-mode = "rmii";
> > > > +
> > > > +     mdio0 {
> > > > +             #address-cells = <1>;
> > > > +             #size-cells = <0>;
> > > > +             compatible = "snps,dwmac-mdio";
> > > > +
> > > > +             phy0: ethernet-phy@13 {
> > > > +                     reg = <0x13>;
> > > > +             };
> > > > +     };
> > > > +};
> > > > +
> > > >  &uart1 {
> > > >       interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
> > > >  };
> > > > diff --git a/arch/mips/boot/dts/loongson/lsgz_1b_dev.dts b/arch/mips/boot/dts/loongson/lsgz_1b_dev.dts
> > > > index 89c3dfa574f7..a43df21f2904 100644
> > > > --- a/arch/mips/boot/dts/loongson/lsgz_1b_dev.dts
> > > > +++ b/arch/mips/boot/dts/loongson/lsgz_1b_dev.dts
> > > > @@ -28,6 +28,14 @@ xtal: xtal {
> > > >       };
> > > >  };
> > > >
> > > > +&gmac0 {
> > > > +     status = "okay";
> > > > +};
> > > > +
> > > > +&gmac1 {
> > > > +     status = "okay";
> > > > +};
> > > > +
> > > >  &uart0 {
> > > >       status = "okay";
> > > >  };
> > > > diff --git a/arch/mips/boot/dts/loongson/smartloong_1c.dts b/arch/mips/boot/dts/loongson/smartloong_1c.dts
> > > > index 188aab9e3685..2d8f304aa2c4 100644
> > > > --- a/arch/mips/boot/dts/loongson/smartloong_1c.dts
> > > > +++ b/arch/mips/boot/dts/loongson/smartloong_1c.dts
> > > > @@ -28,6 +28,10 @@ xtal: xtal {
> > > >       };
> > > >  };
> > > >
> > > > +&gmac0 {
> > > > +     status = "okay";
> > > > +};
> > > > +
> > > >  &uart0 {
> > > >       status = "okay";
> > > >  };
> > > > diff --git a/arch/mips/loongson32/common/platform.c b/arch/mips/loongson32/common/platform.c
> > > > index 8272b4133e25..817518531b9b 100644
> > > > --- a/arch/mips/loongson32/common/platform.c
> > > > +++ b/arch/mips/loongson32/common/platform.c
> > > > @@ -8,157 +8,13 @@
> > > >  #include <linux/err.h>
> > > >  #include <linux/mtd/partitions.h>
> > > >  #include <linux/sizes.h>
> > > > -#include <linux/phy.h>
> > > > -#include <linux/stmmac.h>
> > > >  #include <linux/usb/ehci_pdriver.h>
> > > >
> > > >  #include <platform.h>
> > > >  #include <loongson1.h>
> > > >  #include <dma.h>
> > > >  #include <nand.h>
> > > > -
> > > > -/* Synopsys Ethernet GMAC */
> > > > -static struct stmmac_mdio_bus_data ls1x_mdio_bus_data = {
> > > > -     .phy_mask       = 0,
> > > > -};
> > > > -
> > > > -static struct stmmac_dma_cfg ls1x_eth_dma_cfg = {
> > > > -     .pbl            = 1,
> > > > -};
> > > > -
> > > > -int ls1x_eth_mux_init(struct platform_device *pdev, void *priv)
> > > > -{
> > > > -     struct plat_stmmacenet_data *plat_dat = NULL;
> > > > -     u32 val;
> > > > -
> > > > -     val = __raw_readl(LS1X_MUX_CTRL1);
> > > > -
> > > > -#if defined(CONFIG_LOONGSON1_LS1B)
> > > > -     plat_dat = dev_get_platdata(&pdev->dev);
> > > > -     if (plat_dat->bus_id) {
> > > > -             __raw_writel(__raw_readl(LS1X_MUX_CTRL0) | GMAC1_USE_UART1 |
> > > > -                          GMAC1_USE_UART0, LS1X_MUX_CTRL0);
> > > > -             switch (plat_dat->phy_interface) {
> > > > -             case PHY_INTERFACE_MODE_RGMII:
> > > > -                     val &= ~(GMAC1_USE_TXCLK | GMAC1_USE_PWM23);
> > > > -                     break;
> > > > -             case PHY_INTERFACE_MODE_MII:
> > > > -                     val |= (GMAC1_USE_TXCLK | GMAC1_USE_PWM23);
> > > > -                     break;
> > > > -             default:
> > > > -                     pr_err("unsupported mii mode %d\n",
> > > > -                            plat_dat->phy_interface);
> > > > -                     return -ENOTSUPP;
> > > > -             }
> > > > -             val &= ~GMAC1_SHUT;
> > > > -     } else {
> > > > -             switch (plat_dat->phy_interface) {
> > > > -             case PHY_INTERFACE_MODE_RGMII:
> > > > -                     val &= ~(GMAC0_USE_TXCLK | GMAC0_USE_PWM01);
> > > > -                     break;
> > > > -             case PHY_INTERFACE_MODE_MII:
> > > > -                     val |= (GMAC0_USE_TXCLK | GMAC0_USE_PWM01);
> > > > -                     break;
> > > > -             default:
> > > > -                     pr_err("unsupported mii mode %d\n",
> > > > -                            plat_dat->phy_interface);
> > > > -                     return -ENOTSUPP;
> > > > -             }
> > > > -             val &= ~GMAC0_SHUT;
> > > > -     }
> > > > -     __raw_writel(val, LS1X_MUX_CTRL1);
> > > > -#elif defined(CONFIG_LOONGSON1_LS1C)
> > > > -     plat_dat = dev_get_platdata(&pdev->dev);
> > > > -
> > > > -     val &= ~PHY_INTF_SELI;
> > > > -     if (plat_dat->phy_interface == PHY_INTERFACE_MODE_RMII)
> > > > -             val |= 0x4 << PHY_INTF_SELI_SHIFT;
> > > > -     __raw_writel(val, LS1X_MUX_CTRL1);
> > > > -
> > > > -     val = __raw_readl(LS1X_MUX_CTRL0);
> > > > -     __raw_writel(val & (~GMAC_SHUT), LS1X_MUX_CTRL0);
> > > > -#endif
> > > > -
> > > > -     return 0;
> > > > -}
> > > > -
> > > > -static struct plat_stmmacenet_data ls1x_eth0_pdata = {
> > > > -     .bus_id                 = 0,
> > > > -     .phy_addr               = -1,
> > > > -#if defined(CONFIG_LOONGSON1_LS1B)
> > > > -     .phy_interface          = PHY_INTERFACE_MODE_MII,
> > > > -#elif defined(CONFIG_LOONGSON1_LS1C)
> > > > -     .phy_interface          = PHY_INTERFACE_MODE_RMII,
> > > > -#endif
> > > > -     .mdio_bus_data          = &ls1x_mdio_bus_data,
> > > > -     .dma_cfg                = &ls1x_eth_dma_cfg,
> > > > -     .has_gmac               = 1,
> > > > -     .tx_coe                 = 1,
> > > > -     .rx_queues_to_use       = 1,
> > > > -     .tx_queues_to_use       = 1,
> > > > -     .init                   = ls1x_eth_mux_init,
> > > > -};
> > > > -
> > > > -static struct resource ls1x_eth0_resources[] = {
> > > > -     [0] = {
> > > > -             .start  = LS1X_GMAC0_BASE,
> > > > -             .end    = LS1X_GMAC0_BASE + SZ_64K - 1,
> > > > -             .flags  = IORESOURCE_MEM,
> > > > -     },
> > > > -     [1] = {
> > > > -             .name   = "macirq",
> > > > -             .start  = LS1X_GMAC0_IRQ,
> > > > -             .flags  = IORESOURCE_IRQ,
> > > > -     },
> > > > -};
> > > > -
> > > > -struct platform_device ls1x_eth0_pdev = {
> > > > -     .name           = "stmmaceth",
> > > > -     .id             = 0,
> > > > -     .num_resources  = ARRAY_SIZE(ls1x_eth0_resources),
> > > > -     .resource       = ls1x_eth0_resources,
> > > > -     .dev            = {
> > > > -             .platform_data = &ls1x_eth0_pdata,
> > > > -     },
> > > > -};
> > > > -
> > > > -#ifdef CONFIG_LOONGSON1_LS1B
> > > > -static struct plat_stmmacenet_data ls1x_eth1_pdata = {
> > > > -     .bus_id                 = 1,
> > > > -     .phy_addr               = -1,
> > > > -     .phy_interface          = PHY_INTERFACE_MODE_MII,
> > > > -     .mdio_bus_data          = &ls1x_mdio_bus_data,
> > > > -     .dma_cfg                = &ls1x_eth_dma_cfg,
> > > > -     .has_gmac               = 1,
> > > > -     .tx_coe                 = 1,
> > > > -     .rx_queues_to_use       = 1,
> > > > -     .tx_queues_to_use       = 1,
> > > > -     .init                   = ls1x_eth_mux_init,
> > > > -};
> > > > -
> > > > -static struct resource ls1x_eth1_resources[] = {
> > > > -     [0] = {
> > > > -             .start  = LS1X_GMAC1_BASE,
> > > > -             .end    = LS1X_GMAC1_BASE + SZ_64K - 1,
> > > > -             .flags  = IORESOURCE_MEM,
> > > > -     },
> > > > -     [1] = {
> > > > -             .name   = "macirq",
> > > > -             .start  = LS1X_GMAC1_IRQ,
> > > > -             .flags  = IORESOURCE_IRQ,
> > > > -     },
> > > > -};
> > > > -
> > > > -struct platform_device ls1x_eth1_pdev = {
> > > > -     .name           = "stmmaceth",
> > > > -     .id             = 1,
> > > > -     .num_resources  = ARRAY_SIZE(ls1x_eth1_resources),
> > > > -     .resource       = ls1x_eth1_resources,
> > > > -     .dev            = {
> > > > -             .platform_data = &ls1x_eth1_pdata,
> > > > -     },
> > > > -};
> > > > -#endif       /* CONFIG_LOONGSON1_LS1B */
> > > > +#include <irq.h>
> > > >
> > > >  /* GPIO */
> > > >  static struct resource ls1x_gpio0_resources[] = {
> > > > diff --git a/arch/mips/loongson32/ls1b/board.c b/arch/mips/loongson32/ls1b/board.c
> > > > index e8290f200096..f23e4e5c96ee 100644
> > > > --- a/arch/mips/loongson32/ls1b/board.c
> > > > +++ b/arch/mips/loongson32/ls1b/board.c
> > > > @@ -34,8 +34,6 @@ static const struct gpio_led_platform_data ls1x_led_pdata __initconst = {
> > > >  };
> > > >
> > > >  static struct platform_device *ls1b_platform_devices[] __initdata = {
> > > > -     &ls1x_eth0_pdev,
> > > > -     &ls1x_eth1_pdev,
> > > >       &ls1x_ehci_pdev,
> > > >       &ls1x_gpio0_pdev,
> > > >       &ls1x_gpio1_pdev,
> > > > diff --git a/arch/mips/loongson32/ls1c/board.c b/arch/mips/loongson32/ls1c/board.c
> > > > index a7096964fb30..29bc467fd149 100644
> > > > --- a/arch/mips/loongson32/ls1c/board.c
> > > > +++ b/arch/mips/loongson32/ls1c/board.c
> > > > @@ -6,7 +6,6 @@
> > > >  #include <platform.h>
> > > >
> > > >  static struct platform_device *ls1c_platform_devices[] __initdata = {
> > > > -     &ls1x_eth0_pdev,
> > > >       &ls1x_rtc_pdev,
> > > >       &ls1x_wdt_pdev,
> > > >  };
> > > > --
> > > > 2.39.2
> > > >
> >
> >
> >
> > --
> > Best regards,
> >
> > Keguang Zhang



-- 
Best regards,

Keguang Zhang




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux