Re: [PATCH 08/17] MIPS: loongson32: Convert Ethernet platform device to DT

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Jul 29, 2023 at 09:43:09PM +0800, Keguang Zhang wrote:
> Add Ethernet device nodes for Loongson-1 boards,
> and drop the legacy platform devices and data accordingly.

It seems to me that your conversion breaks the RGMII mode support.
What you need to do is to make sure that the respective flags are set
in the MUX space.

Regarding the MUX-space. It looks as a pinctrl-setting space. If so
adding the new pinctrl driver will be required. Otherwise it can be
defined as a syscon-node and then utilized in the Loongson-1 GMAC
low-level driver.

-Serge(y)

> 
> Signed-off-by: Keguang Zhang <keguang.zhang@xxxxxxxxx>
> ---
>  arch/mips/boot/dts/loongson/loongson1.dtsi    |  16 ++
>  arch/mips/boot/dts/loongson/loongson1b.dtsi   |  53 +++++++
>  arch/mips/boot/dts/loongson/loongson1c.dtsi   |  17 ++
>  arch/mips/boot/dts/loongson/lsgz_1b_dev.dts   |   8 +
>  arch/mips/boot/dts/loongson/smartloong_1c.dts |   4 +
>  arch/mips/loongson32/common/platform.c        | 146 +-----------------
>  arch/mips/loongson32/ls1b/board.c             |   2 -
>  arch/mips/loongson32/ls1c/board.c             |   1 -
>  8 files changed, 99 insertions(+), 148 deletions(-)
> 
> diff --git a/arch/mips/boot/dts/loongson/loongson1.dtsi b/arch/mips/boot/dts/loongson/loongson1.dtsi
> index c77aa2d0f66c..48bb786bbf10 100644
> --- a/arch/mips/boot/dts/loongson/loongson1.dtsi
> +++ b/arch/mips/boot/dts/loongson/loongson1.dtsi
> @@ -71,6 +71,22 @@ intc3: interrupt-controller@1fd01088 {
>  			interrupt-parent = <&cpu_intc>;
>  			interrupts = <5>;
>  		};
> +
> +		gmac0: ethernet@1fe10000 {
> +			compatible = "snps,dwmac-3.70a";
> +			reg = <0x1fe10000 0x10000>;
> +
> +			interrupt-parent = <&intc1>;
> +			interrupt-names = "macirq";
> +
> +			clocks = <&clkc LS1X_CLKID_AHB>;
> +			clock-names = "stmmaceth";
> +
> +			snps,pbl = <1>;
> +
> +			status = "disabled";
> +		};
> +
>  	};
>  
>  	apb: bus@1fe40000 {
> diff --git a/arch/mips/boot/dts/loongson/loongson1b.dtsi b/arch/mips/boot/dts/loongson/loongson1b.dtsi
> index 437a77cee163..42b96c557660 100644
> --- a/arch/mips/boot/dts/loongson/loongson1b.dtsi
> +++ b/arch/mips/boot/dts/loongson/loongson1b.dtsi
> @@ -7,6 +7,11 @@
>  #include "loongson1.dtsi"
>  
>  / {
> +	aliases {
> +		ethernet0 = &gmac0;
> +		ethernet1 = &gmac1;
> +	};
> +
>  	cpus {
>  		#address-cells = <1>;
>  		#size-cells = <0>;
> @@ -74,6 +79,54 @@ clkc: clock-controller@1fe78030 {
>  	};
>  };
>  
> +&ahb {
> +	gmac1: ethernet@1fe20000 {
> +		compatible = "snps,dwmac-3.70a";
> +		reg = <0x1fe20000 0x10000>;
> +
> +		interrupt-parent = <&intc1>;
> +		interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
> +		interrupt-names = "macirq";
> +
> +		clocks = <&clkc LS1X_CLKID_AHB>;
> +		clock-names = "stmmaceth";
> +
> +		phy-handle = <&phy1>;
> +		phy-mode = "mii";
> +
> +		snps,pbl = <1>;
> +
> +		status = "disabled";
> +
> +		mdio1 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			compatible = "snps,dwmac-mdio";
> +
> +			phy1: ethernet-phy@0 {
> +				reg = <0x0>;
> +			};
> +		};
> +	};
> +};
> +
> +&gmac0 {
> +	interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
> +
> +	phy-handle = <&phy0>;
> +	phy-mode = "mii";
> +
> +	mdio0 {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		compatible = "snps,dwmac-mdio";
> +
> +		phy0: ethernet-phy@0 {
> +			reg = <0x0>;
> +		};
> +	};
> +};
> +
>  &uart1 {
>  	interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
>  };
> diff --git a/arch/mips/boot/dts/loongson/loongson1c.dtsi b/arch/mips/boot/dts/loongson/loongson1c.dtsi
> index 1dd575b7b2f9..5b3e0f9280f6 100644
> --- a/arch/mips/boot/dts/loongson/loongson1c.dtsi
> +++ b/arch/mips/boot/dts/loongson/loongson1c.dtsi
> @@ -41,6 +41,23 @@ intc4: interrupt-controller@1fd010a0 {
>  	};
>  };
>  
> +&gmac0 {
> +	interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
> +
> +	phy-handle = <&phy0>;
> +	phy-mode = "rmii";
> +
> +	mdio0 {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		compatible = "snps,dwmac-mdio";
> +
> +		phy0: ethernet-phy@13 {
> +			reg = <0x13>;
> +		};
> +	};
> +};
> +
>  &uart1 {
>  	interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
>  };
> diff --git a/arch/mips/boot/dts/loongson/lsgz_1b_dev.dts b/arch/mips/boot/dts/loongson/lsgz_1b_dev.dts
> index 89c3dfa574f7..a43df21f2904 100644
> --- a/arch/mips/boot/dts/loongson/lsgz_1b_dev.dts
> +++ b/arch/mips/boot/dts/loongson/lsgz_1b_dev.dts
> @@ -28,6 +28,14 @@ xtal: xtal {
>  	};
>  };
>  
> +&gmac0 {
> +	status = "okay";
> +};
> +
> +&gmac1 {
> +	status = "okay";
> +};
> +
>  &uart0 {
>  	status = "okay";
>  };
> diff --git a/arch/mips/boot/dts/loongson/smartloong_1c.dts b/arch/mips/boot/dts/loongson/smartloong_1c.dts
> index 188aab9e3685..2d8f304aa2c4 100644
> --- a/arch/mips/boot/dts/loongson/smartloong_1c.dts
> +++ b/arch/mips/boot/dts/loongson/smartloong_1c.dts
> @@ -28,6 +28,10 @@ xtal: xtal {
>  	};
>  };
>  
> +&gmac0 {
> +	status = "okay";
> +};
> +
>  &uart0 {
>  	status = "okay";
>  };
> diff --git a/arch/mips/loongson32/common/platform.c b/arch/mips/loongson32/common/platform.c
> index 8272b4133e25..817518531b9b 100644
> --- a/arch/mips/loongson32/common/platform.c
> +++ b/arch/mips/loongson32/common/platform.c
> @@ -8,157 +8,13 @@
>  #include <linux/err.h>
>  #include <linux/mtd/partitions.h>
>  #include <linux/sizes.h>
> -#include <linux/phy.h>
> -#include <linux/stmmac.h>
>  #include <linux/usb/ehci_pdriver.h>
>  
>  #include <platform.h>
>  #include <loongson1.h>
>  #include <dma.h>
>  #include <nand.h>
> -
> -/* Synopsys Ethernet GMAC */
> -static struct stmmac_mdio_bus_data ls1x_mdio_bus_data = {
> -	.phy_mask	= 0,
> -};
> -
> -static struct stmmac_dma_cfg ls1x_eth_dma_cfg = {
> -	.pbl		= 1,
> -};
> -
> -int ls1x_eth_mux_init(struct platform_device *pdev, void *priv)
> -{
> -	struct plat_stmmacenet_data *plat_dat = NULL;
> -	u32 val;
> -
> -	val = __raw_readl(LS1X_MUX_CTRL1);
> -
> -#if defined(CONFIG_LOONGSON1_LS1B)
> -	plat_dat = dev_get_platdata(&pdev->dev);
> -	if (plat_dat->bus_id) {
> -		__raw_writel(__raw_readl(LS1X_MUX_CTRL0) | GMAC1_USE_UART1 |
> -			     GMAC1_USE_UART0, LS1X_MUX_CTRL0);
> -		switch (plat_dat->phy_interface) {
> -		case PHY_INTERFACE_MODE_RGMII:
> -			val &= ~(GMAC1_USE_TXCLK | GMAC1_USE_PWM23);
> -			break;
> -		case PHY_INTERFACE_MODE_MII:
> -			val |= (GMAC1_USE_TXCLK | GMAC1_USE_PWM23);
> -			break;
> -		default:
> -			pr_err("unsupported mii mode %d\n",
> -			       plat_dat->phy_interface);
> -			return -ENOTSUPP;
> -		}
> -		val &= ~GMAC1_SHUT;
> -	} else {
> -		switch (plat_dat->phy_interface) {
> -		case PHY_INTERFACE_MODE_RGMII:
> -			val &= ~(GMAC0_USE_TXCLK | GMAC0_USE_PWM01);
> -			break;
> -		case PHY_INTERFACE_MODE_MII:
> -			val |= (GMAC0_USE_TXCLK | GMAC0_USE_PWM01);
> -			break;
> -		default:
> -			pr_err("unsupported mii mode %d\n",
> -			       plat_dat->phy_interface);
> -			return -ENOTSUPP;
> -		}
> -		val &= ~GMAC0_SHUT;
> -	}
> -	__raw_writel(val, LS1X_MUX_CTRL1);
> -#elif defined(CONFIG_LOONGSON1_LS1C)
> -	plat_dat = dev_get_platdata(&pdev->dev);
> -
> -	val &= ~PHY_INTF_SELI;
> -	if (plat_dat->phy_interface == PHY_INTERFACE_MODE_RMII)
> -		val |= 0x4 << PHY_INTF_SELI_SHIFT;
> -	__raw_writel(val, LS1X_MUX_CTRL1);
> -
> -	val = __raw_readl(LS1X_MUX_CTRL0);
> -	__raw_writel(val & (~GMAC_SHUT), LS1X_MUX_CTRL0);
> -#endif
> -
> -	return 0;
> -}
> -
> -static struct plat_stmmacenet_data ls1x_eth0_pdata = {
> -	.bus_id			= 0,
> -	.phy_addr		= -1,
> -#if defined(CONFIG_LOONGSON1_LS1B)
> -	.phy_interface		= PHY_INTERFACE_MODE_MII,
> -#elif defined(CONFIG_LOONGSON1_LS1C)
> -	.phy_interface		= PHY_INTERFACE_MODE_RMII,
> -#endif
> -	.mdio_bus_data		= &ls1x_mdio_bus_data,
> -	.dma_cfg		= &ls1x_eth_dma_cfg,
> -	.has_gmac		= 1,
> -	.tx_coe			= 1,
> -	.rx_queues_to_use	= 1,
> -	.tx_queues_to_use	= 1,
> -	.init			= ls1x_eth_mux_init,
> -};
> -
> -static struct resource ls1x_eth0_resources[] = {
> -	[0] = {
> -		.start	= LS1X_GMAC0_BASE,
> -		.end	= LS1X_GMAC0_BASE + SZ_64K - 1,
> -		.flags	= IORESOURCE_MEM,
> -	},
> -	[1] = {
> -		.name	= "macirq",
> -		.start	= LS1X_GMAC0_IRQ,
> -		.flags	= IORESOURCE_IRQ,
> -	},
> -};
> -
> -struct platform_device ls1x_eth0_pdev = {
> -	.name		= "stmmaceth",
> -	.id		= 0,
> -	.num_resources	= ARRAY_SIZE(ls1x_eth0_resources),
> -	.resource	= ls1x_eth0_resources,
> -	.dev		= {
> -		.platform_data = &ls1x_eth0_pdata,
> -	},
> -};
> -
> -#ifdef CONFIG_LOONGSON1_LS1B
> -static struct plat_stmmacenet_data ls1x_eth1_pdata = {
> -	.bus_id			= 1,
> -	.phy_addr		= -1,
> -	.phy_interface		= PHY_INTERFACE_MODE_MII,
> -	.mdio_bus_data		= &ls1x_mdio_bus_data,
> -	.dma_cfg		= &ls1x_eth_dma_cfg,
> -	.has_gmac		= 1,
> -	.tx_coe			= 1,
> -	.rx_queues_to_use	= 1,
> -	.tx_queues_to_use	= 1,
> -	.init			= ls1x_eth_mux_init,
> -};
> -
> -static struct resource ls1x_eth1_resources[] = {
> -	[0] = {
> -		.start	= LS1X_GMAC1_BASE,
> -		.end	= LS1X_GMAC1_BASE + SZ_64K - 1,
> -		.flags	= IORESOURCE_MEM,
> -	},
> -	[1] = {
> -		.name	= "macirq",
> -		.start	= LS1X_GMAC1_IRQ,
> -		.flags	= IORESOURCE_IRQ,
> -	},
> -};
> -
> -struct platform_device ls1x_eth1_pdev = {
> -	.name		= "stmmaceth",
> -	.id		= 1,
> -	.num_resources	= ARRAY_SIZE(ls1x_eth1_resources),
> -	.resource	= ls1x_eth1_resources,
> -	.dev		= {
> -		.platform_data = &ls1x_eth1_pdata,
> -	},
> -};
> -#endif	/* CONFIG_LOONGSON1_LS1B */
> +#include <irq.h>
>  
>  /* GPIO */
>  static struct resource ls1x_gpio0_resources[] = {
> diff --git a/arch/mips/loongson32/ls1b/board.c b/arch/mips/loongson32/ls1b/board.c
> index e8290f200096..f23e4e5c96ee 100644
> --- a/arch/mips/loongson32/ls1b/board.c
> +++ b/arch/mips/loongson32/ls1b/board.c
> @@ -34,8 +34,6 @@ static const struct gpio_led_platform_data ls1x_led_pdata __initconst = {
>  };
>  
>  static struct platform_device *ls1b_platform_devices[] __initdata = {
> -	&ls1x_eth0_pdev,
> -	&ls1x_eth1_pdev,
>  	&ls1x_ehci_pdev,
>  	&ls1x_gpio0_pdev,
>  	&ls1x_gpio1_pdev,
> diff --git a/arch/mips/loongson32/ls1c/board.c b/arch/mips/loongson32/ls1c/board.c
> index a7096964fb30..29bc467fd149 100644
> --- a/arch/mips/loongson32/ls1c/board.c
> +++ b/arch/mips/loongson32/ls1c/board.c
> @@ -6,7 +6,6 @@
>  #include <platform.h>
>  
>  static struct platform_device *ls1c_platform_devices[] __initdata = {
> -	&ls1x_eth0_pdev,
>  	&ls1x_rtc_pdev,
>  	&ls1x_wdt_pdev,
>  };
> -- 
> 2.39.2
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux