Conversion from ftgmac100.txt to yaml format version. Signed-off-by: Ivan Mikhaylov <fr0st61te@xxxxxxxxx> --- .../bindings/net/faraday,ftgmac100.yaml | 104 ++++++++++++++++++ .../devicetree/bindings/net/ftgmac100.txt | 67 ----------- 2 files changed, 104 insertions(+), 67 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml delete mode 100644 Documentation/devicetree/bindings/net/ftgmac100.txt diff --git a/Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml b/Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml new file mode 100644 index 000000000000..965e6db38970 --- /dev/null +++ b/Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml @@ -0,0 +1,104 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/faraday,ftgmac100.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Faraday Technology FTGMAC100 gigabit ethernet controller + +allOf: + - $ref: ethernet-controller.yaml# + +maintainers: + - Po-Yu Chuang <ratbert@xxxxxxxxxxxxxxxx> + +properties: + compatible: + oneOf: + - const: faraday,ftgmac100 + - items: + - enum: + - aspeed,ast2400-mac + - aspeed,ast2500-mac + - aspeed,ast2600-mac + - const: faraday,ftgmac100 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 1 + items: + - description: MAC IP clock + - description: RMII RCLK gate for AST2500/2600 + + clock-names: + minItems: 1 + maxItems: 2 + contains: + enum: + - MACCLK + - RCLK + + phy-mode: + enum: + - rgmii + - rmii + + phy-handle: true + + use-ncsi: + description: + Use the NC-SI stack instead of an MDIO PHY. Currently assumes + rmii (100bT) but kept as a separate property in case NC-SI grows support + for a gigabit link. + type: boolean + + no-hw-checksum: + description: + Used to disable HW checksum support. Here for backward + compatibility as the driver now should have correct defaults based on + the SoC. + type: boolean + deprecated: true + + mdio: + $ref: /schemas/net/mdio.yaml# + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + ethernet@1e660000 { + compatible = "aspeed,ast2500-mac", "faraday,ftgmac100"; + reg = <0x1e660000 0x180>; + interrupts = <2>; + use-ncsi; + }; + + ethernet@1e680000 { + compatible = "aspeed,ast2500-mac", "faraday,ftgmac100"; + reg = <0x1e680000 0x180>; + interrupts = <2>; + + phy-handle = <&phy>; + phy-mode = "rgmii"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/ftgmac100.txt b/Documentation/devicetree/bindings/net/ftgmac100.txt deleted file mode 100644 index 29234021f601..000000000000 --- a/Documentation/devicetree/bindings/net/ftgmac100.txt +++ /dev/null @@ -1,67 +0,0 @@ -* Faraday Technology FTGMAC100 gigabit ethernet controller - -Required properties: -- compatible: "faraday,ftgmac100" - - Must also contain one of these if used as part of an Aspeed AST2400 - or 2500 family SoC as they have some subtle tweaks to the - implementation: - - - "aspeed,ast2400-mac" - - "aspeed,ast2500-mac" - - "aspeed,ast2600-mac" - -- reg: Address and length of the register set for the device -- interrupts: Should contain ethernet controller interrupt - -Optional properties: -- phy-handle: See ethernet.txt file in the same directory. -- phy-mode: See ethernet.txt file in the same directory. If the property is - absent, "rgmii" is assumed. Supported values are "rgmii*" and "rmii" for - aspeed parts. Other (unknown) parts will accept any value. -- use-ncsi: Use the NC-SI stack instead of an MDIO PHY. Currently assumes - rmii (100bT) but kept as a separate property in case NC-SI grows support - for a gigabit link. -- no-hw-checksum: Used to disable HW checksum support. Here for backward - compatibility as the driver now should have correct defaults based on - the SoC. -- clocks: In accordance with the generic clock bindings. Must describe the MAC - IP clock, and optionally an RMII RCLK gate for the AST2500/AST2600. The - required MAC clock must be the first cell. -- clock-names: - - - "MACCLK": The MAC IP clock - - "RCLK": Clock gate for the RMII RCLK - -Optional subnodes: -- mdio: See mdio.txt file in the same directory. - -Example: - - mac0: ethernet@1e660000 { - compatible = "aspeed,ast2500-mac", "faraday,ftgmac100"; - reg = <0x1e660000 0x180>; - interrupts = <2>; - use-ncsi; - }; - -Example with phy-handle: - - mac1: ethernet@1e680000 { - compatible = "aspeed,ast2500-mac", "faraday,ftgmac100"; - reg = <0x1e680000 0x180>; - interrupts = <2>; - - phy-handle = <&phy>; - phy-mode = "rgmii"; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy: ethernet-phy@1 { - compatible = "ethernet-phy-ieee802.3-c22"; - reg = <1>; - }; - }; - }; -- 2.41.0
