Each interrupt should be in its own cell. This is much more readable.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
arch/arm/boot/dts/st/spear1340.dtsi | 8 ++++----
arch/arm/boot/dts/st/spear13xx.dtsi | 24 ++++++++++++------------
2 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/arch/arm/boot/dts/st/spear1340.dtsi b/arch/arm/boot/dts/st/spear1340.dtsi
index d54e10629a7d..51f6ffd08b42 100644
--- a/arch/arm/boot/dts/st/spear1340.dtsi
+++ b/arch/arm/boot/dts/st/spear1340.dtsi
@@ -63,8 +63,8 @@ i2s-play@b2400000 {
compatible = "snps,designware-i2s";
reg = <0xb2400000 0x10000>;
interrupt-names = "play_irq";
- interrupts = <0 98 0x4
- 0 99 0x4>;
+ interrupts = <0 98 0x4>,
+ <0 99 0x4>;
play;
channel = <8>;
status = "disabled";
@@ -74,8 +74,8 @@ i2s-rec@b2000000 {
compatible = "snps,designware-i2s";
reg = <0xb2000000 0x10000>;
interrupt-names = "record_irq";
- interrupts = <0 100 0x4
- 0 101 0x4>;
+ interrupts = <0 100 0x4>,
+ <0 101 0x4>;
record;
channel = <8>;
status = "disabled";
diff --git a/arch/arm/boot/dts/st/spear13xx.dtsi b/arch/arm/boot/dts/st/spear13xx.dtsi
index 913553367687..3b6897084e26 100644
--- a/arch/arm/boot/dts/st/spear13xx.dtsi
+++ b/arch/arm/boot/dts/st/spear13xx.dtsi
@@ -39,8 +39,8 @@ gic: interrupt-controller@ec801000 {
pmu {
compatible = "arm,cortex-a9-pmu";
- interrupts = <0 6 0x04
- 0 7 0x04>;
+ interrupts = <0 6 0x04>,
+ <0 7 0x04>;
};
L2: cache-controller {
@@ -141,10 +141,10 @@ fsmc: flash@b0000000 {
0xb0820000 0x0010 /* NAND Base ADDR */
0xb0810000 0x0010>; /* NAND Base CMD */
reg-names = "fsmc_regs", "nand_data", "nand_addr", "nand_cmd";
- interrupts = <0 20 0x4
- 0 21 0x4
- 0 22 0x4
- 0 23 0x4>;
+ interrupts = <0 20 0x4>,
+ <0 21 0x4>,
+ <0 22 0x4>,
+ <0 23 0x4>;
st,mode = <2>;
status = "disabled";
};
@@ -152,8 +152,8 @@ fsmc: flash@b0000000 {
gmac0: eth@e2000000 {
compatible = "st,spear600-gmac";
reg = <0xe2000000 0x8000>;
- interrupts = <0 33 0x4
- 0 34 0x4>;
+ interrupts = <0 33 0x4>,
+ <0 34 0x4>;
interrupt-names = "macirq", "eth_wake_irq";
status = "disabled";
};
@@ -263,8 +263,8 @@ i2s@e0180000 {
compatible = "st,designware-i2s";
reg = <0xe0180000 0x1000>;
interrupt-names = "play_irq", "record_irq";
- interrupts = <0 10 0x4
- 0 11 0x4 >;
+ interrupts = <0 10 0x4>,
+ <0 11 0x4>;
status = "disabled";
};
@@ -272,8 +272,8 @@ i2s@e0200000 {
compatible = "st,designware-i2s";
reg = <0xe0200000 0x1000>;
interrupt-names = "play_irq", "record_irq";
- interrupts = <0 26 0x4
- 0 53 0x4>;
+ interrupts = <0 26 0x4>,
+ <0 53 0x4>;
status = "disabled";
};
--
2.34.1
