Re: [PATCH v1 2/2] doc: dt: bindings: usb: realtek,dwc3: Add Realtek DHC RTD SoC DWC3 USB

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 28/07/2023 19:37, Stanley Chang[昌育德] wrote:
>>> +
>>> +  realtek,disable-usb3-phy:
>>> +    description: Close USB 3.0 PHY if the board design not support USB 3.0.
>>> +    type: boolean
>>> +
>>> +  realtek,enable-l4icg:
>>> +    description: Enable the power saving feature l4icg by hardware clock.
>>> +      gating.
>>
>> You described the desired Linux feature or behavior, not the actual hardware.
>> The bindings are about the latter, so instead you need to rephrase the property
>> and its description to match actual hardware
>> capabilities/features/configuration etc.
> 
> The l4icg entry is a hardware feature for power saving. 
> The term may not clearly convey the function.
> So instead of the term "l4icg" I use "hw clock gating".
> 
>   realtek,enable-hw-clock-gating:
>     description: Enable the clock gated function which will gating sram
>       clock when dbus idle.

And why this should be configurable per board? It looks you like to put
OS policy into DT, so no.


Best regards,
Krzysztof




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux