On 10:38-20230728, Jayesh Choudhary wrote: > This series adds support for: > - SERDES, WIZ DT nodes, Serdes lane control mux > - DSS and DisplayPort-0 nodes > > This support DEPENDS upon another series which was introduced as part > of discussion in v5. That series[1] moves the ti-serdes headers file > from bindings to "arch/arm64/boot/dts/ti". (That series is merged in > linux-next tree) > > Changelog v6->v7: > - change compatible for scm_conf to 'simple-bus' > - drop main_cpsw node due to driver dependency on [2] > > Changelog v5->v6: > - Change header file according to [1]. > - Add idle-state property in serdes_ln_ctrl node. > - Fix dtbs_check warning due to clock-frequency property in serdes_refclk > node by disabling the node in main.dtsi and enabling it in board file > when the clock-frequency node is actually added. > > Changelog v4->v5: > - rebased the patches on linux-next tip. > > Changelog v3->v4: > - add reg property to serdes_ln_ctrl and fix the node name again to > get rid of dtbs_check error. > - reorder reg, reg-names and ranges property for main_cpsw1. > - correct the order for clocks in serdes_wiz nodes to fix dtbs_check > warnings. > - fix indentation in reg, reg-names and clock property for dss node. > - add comments for the reg type in dss registers. > > Changelog v3->v2: > - fix dtc warnings for 'scm_conf' and 'serdes_ln_ctrl' nodes > (Checked all the changes of the series with W=12 option during build) > - added clock-frequency for serdes_refclk along with other EVM changes > This refclk is being used by all the instances of serdes_wiz which > are disabled by default. So configuring refclk when the serdes nodes > are used for the first time is okay. > > Changelog v1->v2: > - Moved J784S4 EVM changes together to the last patch > (Suggested by Andrew) > > v5 patch link: > <https://lore.kernel.org/all/20230721132029.123881-1-j-choudhary@xxxxxx/> > > [1]: <https://lore.kernel.org/all/20230721125732.122421-1-j-choudhary@xxxxxx/> > [2]: <https://lore.kernel.org/all/20230605154153.24025-1-afd@xxxxxx/> > > Rahul T R (2): > arm64: dts: ti: k3-j784s4-main: Add DSS and DP-bridge node > arm64: dts: ti: k3-j784s4-evm: Enable DisplayPort-0 > Could you enable AM69-SK as well? is there anything stopping it being part of the series? -- Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
