This series adds support for: - SERDES, WIZ DT nodes, Serdes lane control mux - DSS and DisplayPort-0 nodes This support DEPENDS upon another series which was introduced as part of discussion in v5. That series[1] moves the ti-serdes headers file from bindings to "arch/arm64/boot/dts/ti". (That series is merged in linux-next tree) Changelog v6->v7: - change compatible for scm_conf to 'simple-bus' - drop main_cpsw node due to driver dependency on [2] Changelog v5->v6: - Change header file according to [1]. - Add idle-state property in serdes_ln_ctrl node. - Fix dtbs_check warning due to clock-frequency property in serdes_refclk node by disabling the node in main.dtsi and enabling it in board file when the clock-frequency node is actually added. Changelog v4->v5: - rebased the patches on linux-next tip. Changelog v3->v4: - add reg property to serdes_ln_ctrl and fix the node name again to get rid of dtbs_check error. - reorder reg, reg-names and ranges property for main_cpsw1. - correct the order for clocks in serdes_wiz nodes to fix dtbs_check warnings. - fix indentation in reg, reg-names and clock property for dss node. - add comments for the reg type in dss registers. Changelog v3->v2: - fix dtc warnings for 'scm_conf' and 'serdes_ln_ctrl' nodes (Checked all the changes of the series with W=12 option during build) - added clock-frequency for serdes_refclk along with other EVM changes This refclk is being used by all the instances of serdes_wiz which are disabled by default. So configuring refclk when the serdes nodes are used for the first time is okay. Changelog v1->v2: - Moved J784S4 EVM changes together to the last patch (Suggested by Andrew) v5 patch link: <https://lore.kernel.org/all/20230721132029.123881-1-j-choudhary@xxxxxx/> [1]: <https://lore.kernel.org/all/20230721125732.122421-1-j-choudhary@xxxxxx/> [2]: <https://lore.kernel.org/all/20230605154153.24025-1-afd@xxxxxx/> Rahul T R (2): arm64: dts: ti: k3-j784s4-main: Add DSS and DP-bridge node arm64: dts: ti: k3-j784s4-evm: Enable DisplayPort-0 Siddharth Vadapalli (2): arm64: dts: ti: k3-j784s4-main: Add system controller and SERDES lane mux arm64: dts: ti: k3-j784s4: Add WIZ and SERDES PHY nodes arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 117 +++++++++ arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 285 +++++++++++++++++++++ 2 files changed, 402 insertions(+) -- 2.25.1
