[PATCH v5 0/2] soc: loongson2_pm: add power management support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Loongson-2 platform support Power Management Controller (ACPI) and this
series patch was to add PM driver that base on dts and PM binding support.

Change in v5:
		1. The patch "[PATCH v3 1/3] loongarch: export some arch-specific
		   pm interfaces" had been merged into linux-next tree thus this
		   v4 series patch need drop it and need depend on it and it's
		   patch link was:
https://lore.kernel.org/all/20230615091757.24686-2-zhuyinbo@xxxxxxxxxxx/
		2. Swap the positions of compatible for 2k1000 and 2k0500.
Change in v4:
		1. The patch "[PATCH v3 1/3] loongarch: export some arch-specific
		   pm interfaces" had been merged into linux-next tree thus this
		   v4 series patch need drop it and need depend on it and it's
		   patch link was:
https://lore.kernel.org/all/20230615091757.24686-2-zhuyinbo@xxxxxxxxxxx/
		2. Remove the pmc label in dt-binding patch.
		3. Add the Co-developed-by for driver patch.
		4. Simplify the loongson2_suspend_valid_state that "return
		   (state == PM_SUSPEND_MEM)".
		5. Use Using loongson2_pm_irq_enable() to replace.
		   loongson2_power_button_irq_enable().
		6. Remove the "oneOf" in dt-bindings patch.
		7. Replace "suspend-address" that use "loongson,suspend-address".
		8. Use u64 type that for "loongson,suspend-address".
		9. Rename "pm" to "power-mangement" in dt-bindings patch.
		10. Add the reivewed-by for dt-bindings patch.
Change in v3:
		1. Reword the [1/3] patch commit log and title.
		2. Use the old naming for suspend interface for the [1/3] and
		   [3/3] patch.
		3. Combine some small function in the driver patch.
		4. Rename 'pwrbt' to 'button' in the driver patch.
		5. Use the specific compatible in yaml file.
Change in v2:
		1. Fixup the "suspend-address" description.
		2. Remove the "return -EINVAL" in PM driver probe when firmware
		   no configure "suspend-address" property in dts in oder to
		   other PM state to work.

Yinbo Zhu (2):
  soc: dt-bindings: add loongson-2 pm
  soc: loongson2_pm: add power management support

 .../soc/loongson/loongson,ls2k-pmc.yaml       |  52 +++++
 MAINTAINERS                                   |   7 +
 drivers/soc/loongson/Kconfig                  |  10 +
 drivers/soc/loongson/Makefile                 |   1 +
 drivers/soc/loongson/loongson2_pm.c           | 215 ++++++++++++++++++
 5 files changed, 285 insertions(+)

-- 
2.20.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux