On 26.07.2023 21:33, Conor Dooley wrote:
On Wed, Jul 26, 2023 at 10:19:02AM +0200, Lukasz Majewski wrote:
Dear Community,
Without this change the KSZ9477-EVB board hangs just after passing
execution flow from u-boot to Linux kernel.
This code has been copied from at91-sama5d3_xplained.dts.
Test setup: Linux 6.5-rc1
Config: arch/arm/configs/sama5_defconfig
Toolchain: gcc-linaro-7.3.1-2018.05-x86_64_arm-linux-gnueabi
Signed-off-by: Lukasz Majewski <lukma@xxxxxxx>
---
.../boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts | 12
++++++++++++ 1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts
b/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts index
14af1fd6d247..99cd6d15998b 100644 ---
a/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts +++
b/arch/arm/boot/dts/microchip/at91-sama5d3_ksz9477_evb.dts @@ -162,6
+162,18 @@ };
};
+&tcb0 {
+ timer0: timer@0 {
+ compatible = "atmel,tcb-timer";
+ reg = <0>;
+ };
+
+ timer1: timer@1 {
+ compatible = "atmel,tcb-timer";
+ reg = <1>;
+ };
+};
+
&usb0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usba_vbus>;
Gentle ping on this fix ...
Claudiu has left Microchip, so things might've got a bit lost on the
way. I've added his new address, Claudiu, will you take a look/pick this
up please? I can also do it if that is easier for you.
It's on my list.
Thanks,
Claudiu
Thanks,
Conor.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
