Fixed regulators put under "regulators" node will not be populated,
unless simple-bus or something similar is used. Drop the "regulators"
wrapper node to fix this.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
arch/arm/boot/dts/nxp/mxs/imx28-m28evk.dts | 45 ++++++++++------------
1 file changed, 20 insertions(+), 25 deletions(-)
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-m28evk.dts b/arch/arm/boot/dts/nxp/mxs/imx28-m28evk.dts
index e350d57a4cec..6bf26f386a5e 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx28-m28evk.dts
+++ b/arch/arm/boot/dts/nxp/mxs/imx28-m28evk.dts
@@ -18,33 +18,28 @@ backlight {
default-brightness-level = <6>;
};
- regulators {
- reg_vddio_sd0: regulator@1 {
- compatible = "regulator-fixed";
- reg = <1>;
- regulator-name = "vddio-sd0";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio3 28 0>;
- };
+ reg_vddio_sd0: regulator-1 {
+ compatible = "regulator-fixed";
+ regulator-name = "vddio-sd0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio3 28 0>;
+ };
- reg_usb0_vbus: regulator@2 {
- compatible = "regulator-fixed";
- reg = <2>;
- regulator-name = "usb0_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 12 0>;
- };
+ reg_usb0_vbus: regulator-2 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb0_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 12 0>;
+ };
- reg_usb1_vbus: regulator@3 {
- compatible = "regulator-fixed";
- reg = <3>;
- regulator-name = "usb1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- gpio = <&gpio3 13 0>;
- };
+ reg_usb1_vbus: regulator-3 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 13 0>;
};
sound {
--
2.34.1
