Hi Marco,
Thank you for the patch.
On Mon, Jul 17, 2023 at 06:51:24PM +0200, Marco Felsch wrote:
> The SoM A make use of the EQOS ethernet interface and not the FEC, so
> drop the FEC pinctrl node from the devicetree.
>
> Fixes: c86d350aae68 ("arm64: dts: Add device tree for the Debix Model A Board")
> Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>
I think the I/O board uses the FEC for its ethernet interface. It would
be nice to eventually move this to an I/O board overlay, but for now,
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> ---
> Changelog:
>
> v2:
> - new patch
>
> .../dts/freescale/imx8mp-debix-model-a.dts | 22 -------------------
> 1 file changed, 22 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
> index b4409349eb3f6..1004ab0abb131 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
> @@ -355,28 +355,6 @@ MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x19
> >;
> };
>
> - pinctrl_fec: fecgrp {
> - fsl,pins = <
> - MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x3
> - MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x3
> - MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91
> - MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91
> - MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91
> - MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91
> - MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91
> - MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91
> - MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f
> - MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f
> - MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f
> - MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f
> - MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f
> - MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f
> - MX8MP_IOMUXC_SAI1_RXD1__ENET1_1588_EVENT1_OUT 0x1f
> - MX8MP_IOMUXC_SAI1_RXD0__ENET1_1588_EVENT1_IN 0x1f
> - MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19 0x19
> - >;
> - };
> -
> pinctrl_gpio_led: gpioledgrp {
> fsl,pins = <
> MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x19
--
Regards,
Laurent Pinchart
